Skip to content

VMLogin Proxy Error: 5 Checks When Test Proxy Fails

When VMLogin shows a proxy error, the cause is usually the IP term or traffic, the type, the login or the network.

The 3 most common causes

IP term or traffic: VMLogin's list starts with not enough proxy traffic or balance. For a leased IP the equivalent is an end date that has passed, and for rotating residential it is traffic that has run out.

Type or login: in the Setting proxy server window Enable proxy server must be on and the type must match the IP. VMLogin lists HTTP, HTTPS, SOCKS4 and SOCKS5, but a Proxy302 IP is HTTP or SOCKS5. A missing or wrong username and password is the other half of this cause.

The network to the site: Test Proxy can pass while the browser shows The site cannot be reached, Connection time-out or Bad gateway. VMLogin says the fix then depends on where you are.

What you see and where to look

What you see and where to look
ItemLikely causeWhere to look
Test Proxy fails at onceWrong type, or username and password missing or wrongChecks 2 and 3
It worked yesterday and fails todayIP past its end date or traffic used upCheck 1, My assets
Test Proxy passes, the browser shows Connection time-outNetwork from your computer to the sitesCheck 4
A name and password prompt returns after a page opensVMLogin says wrong credentials or no permission for that IPCheck 3, then Check 4
Test Proxy passes once and fails the next timeAn unstable IP: VMLogin suggests retrying several times or changing the IPCheck 4

Built from the VMLogin help pages read on 17 November 2026 and the Proxy302 product facts.

Five checks, easiest first

  1. Step 1: Is the IP still valid?

    In Proxy302 My assets look at the end date of the IP, or the traffic left on rotating residential. Renew or generate again if it has run out, then update the profile. If the IP is within its term and still fails, open a Support ticket with the order number and it is reissued.

  2. Step 2: Type and Enable proxy server

    Open the profile, click Setting proxy server and make sure Enable proxy server is switched on. Pick HTTP Proxy or Socks 5 Proxy to match the tag next to the entry address in My assets: HTTP uses port 2222, SOCKS5 port 3333. A static ISP IP leased per IP also answers on the other protocol at that protocol's port, but keep type and port together.

  3. Step 3: Paste again and check the four fields

    Copy the proxy info from My assets with the copy button and click Paste proxy info again, then compare IP address, Port, Username and Password with My assets without spaces at either end. A username and password prompt that comes back after a page opens usually means wrong credentials, so retype them rather than saving the prompt.

  4. Step 4: Network, then retry or change the IP

    Click Test Proxy again, several times if it is unstable; VMLogin suggests changing the IP if it keeps failing. If the test passes but pages time out, VMLogin tells users on a domestic network to try an overseas network. In mainland China start Proxy302 Fast Connect first and keep it open. If only some sites fail, ask Proxy302 Support, with the order number and the site names.

  5. Step 5: Test outside VMLogin

    Run the command-line test below on the same computer. If it prints your proxy exit IP, the proxy works and the fault is what was entered in VMLogin; if it times out, go back to checks 1 and 4.

Rule VMLogin out with the command line

Run this on the same computer. If it prints your proxy exit IP, the proxy works and the fault is in what VMLogin was given (checks 2 and 3). A timeout or refusal points to the network or the IP term (checks 1 and 4).

Command-line test: example

curl -x http://USERNAME:PASSWORD@HOST:PORT https://ipinfo.io/json

# SOCKS5 (DNS is also resolved through the proxy)
curl -x socks5h://USERNAME:PASSWORD@HOST:PORT https://ipinfo.io/json

Example only: replace the capitalised placeholders with the values from My assets. Use the first line for an HTTP IP and the second for a SOCKS5 IP.

Reading the result

A JSON answer with the ip, country and organisation fields means the proxy is fine. A 407 means the account or password is wrong. The proxy connection guide goes further, and the 407 guide explains authentication errors.

When one thing keeps failing

Test Proxy fails with several different IPs

Check The command-line test on this computer

Fix If curl fails too, fix the network first. If curl works, click Setting proxy server, switch Enable proxy server off and on, and paste the line again.

Stop when Stop swapping IPs after two failures with the same symptom.

Test Proxy passes but the browser times out

Check Whether other sites load, and your network

Fix Try another network, or Fast Connect in mainland China. VMLogin says if only some sites fail, ask the provider whether they are blocked.

Stop when If a site fails on a network that otherwise works, send Support the site name and the order number.

A name and password prompt keeps coming back

Check Username and password in My assets

Fix Copy them again without spaces and paste in the profile. Change the IP if it still asks.

Stop when If a fresh IP asks as well, open a ticket with the order number.

Enter a Proxy302 IP in VMLogin

  1. Step 1

    Log in to Proxy302, open the IP in My assets and note the HTTP or SOCKS5 tag; copy the connection line.

  2. Step 2

    In VMLogin click New browser profile, type a Display name and open Setting proxy server. Switch on Enable proxy server and pick HTTP Proxy or Socks 5 Proxy.

  3. Step 3

    Click Paste proxy info, then Test Proxy. When it passes, click Save and then Save profile.

  4. Step 4

    Launch the browser and confirm the exit IP on an IP check page. For one account use one fixed IP and keep to the platform's terms. The full steps are on the VMLogin setup page.

FAQ

Why does VMLogin say the proxy failed when it works elsewhere?

VMLogin's window needs Enable proxy server on, the right type and all four fields. A switched-off option, a wrong type or a stray space fails the test even when the IP is fine.

Test Proxy passes, why can the browser not open pages?

VMLogin says the test can pass while pages show The site cannot be reached, Connection time-out or Bad gateway, and the fix depends on your network. Try another network, and in mainland China use Fast Connect first.

Which type should I pick in VMLogin?

The one shown on the IP in My assets: HTTP Proxy for HTTP on port 2222, Socks 5 Proxy for SOCKS5 on port 3333. VMLogin also lists Socks 4 and HTTPS, which Proxy302 IPs do not use.

Does VMLogin provide the proxy?

No. VMLogin's help says it does not provide proxy IPs and that you buy them elsewhere, and its speed depends on the proxy.

What does a static IP cost?

From 1 day at US$0.50 up to 90 days; 30 days is US$7.99, about US$0.27 a day (7.99 divided by 30). There is no free trial.

View all partners →

Reference links

4
  1. VMLogin help: Reasons why the proxy network is unavailable

    Official documentation · Confirmed on:

    Read on 17 November 2026: causes and fixes (not enough proxy traffic or balance; wrong proxy type or missing or wrong username and password; unstable or slow IP, retry or change the IP; IP whitelist; limit on connected devices; a username and password prompt after a page opens usually means wrong credentials or no permission for the IP); the test can pass while the browser shows The site cannot be reached, Connection time-out or Bad gateway, and the fix depends on location; VMLogin has no network function and speed depends on the proxy.

  2. VMLogin help: Proxy302 settings

    Official documentation · Confirmed on:

    Read on 17 November 2026: choose HTTP or SOCKS5 when generating the proxy; in New browser profile open Setting proxy server, turn on Enable proxy server, pick HTTP Proxy or Socks 5 Proxy, click Paste proxy info, click Test Proxy, then Save and Save profile; VMLogin does not provide proxy IPs.

  3. VMLogin help: Proxy IP types

    Official documentation · Confirmed on:

    Read on 17 November 2026: VMLogin supports HTTP, HTTPS, SOCKS4, SOCKS5 and IPv6 proxies.

  4. Proxy302 product facts

    Product observation · Confirmed on:

    Product facts file of the site (checked 17 November 2026): HTTP on port 2222, SOCKS5 on port 3333; a static ISP IP leased per IP is issued with one protocol and also connects over the other protocol on its port; prices from US$0.50 for 1 day and US$7.99 for 30 days; a failed asset is reissued after a Support ticket with the order number.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.