Cursor "Model Not Available in Your Region": IP Checks
Cursor picks the region from the IP address it sees, so check your exit IP and any proxy or VPN before you touch anything else.
What the message means
Cursor offers models from several providers, and some providers restrict their models by location. Cursor's help page says those models are hidden in affected regions. One forum user in Japan reported the text "This model is not available in your region" for OpenAI and Claude models while the Claude and ChatGPT apps themselves worked.
The same page says that picking Auto, another model on your account, or your own API key under Cursor Settings > Models are the ways around it, and that your own key can still fail if the provider blocks your region. Grok 4.5 is described as available in every country where Cursor offers models.
Cursor's help page gives no exact error text, so treat the wording above as one user's report, not a fixed error code.
Turn off every proxy and VPN, including system proxy settings, fully quit Cursor and open it again. If the model returns, the proxy or VPN route was the cause.
Step 2
Open Cursor Settings > Network and click Run Diagnostics. It tests the connection to Cursor's servers and flags problems that affect AI features.
Step 3
Check the exit country of the network you use now with a tool such as ipinfo.io, then compare it with the provider's supported-regions list.
If requests hang rather than fail with a region message, set "HTTP Compatibility Mode" to "HTTP/1.1" in Cursor Settings > Network and restart.
Step 5
Pick Auto or a model from another provider while you sort it out. Cursor's page lists these as the options when a model is hidden.
Expected result Auto keeps working in affected regions.
What an exit IP changes, and what it does not
The staff reply says Cursor works out the region from your IP address. If the address belongs to a country the provider supports, the region reason goes away; if your proxy exit sits in a restricted country, it stays. The same reply suggests making sure the exit IP does not resolve to China.
Keep Cursor's own hosts off the proxy path if a filter gets in the way: the staff reply names *.cursor.sh and *.cursor.com for the bypass list, and the common-issues page lists the hosts a firewall must allow.
An IP does not change your account, your plan or the provider's terms. A fixed address keeps the region the same from one session to the next, which avoids the model list changing under you.
Check Does the same account show it on cursor.com? Is a proxy or VPN on?
Fix Turn off the proxy or VPN, restart and compare; then check the exit country.
Stop when If the exit is in a country the provider does not support, adjusting Cursor settings will not help.
It worked yesterday and fails today on the same network
Check Did your IP or proxy exit change? Run ipinfo.io through the same route.
Fix Check the exit country again and restart Cursor.
Stop when Do not switch accounts to retry: that is a different problem from the region.
Replies start and then stall behind a proxy
Check Is the proxy filtering HTTP/2 streaming?
Fix Set "HTTP Compatibility Mode" to "HTTP/1.1" and restart.
Stop when If Run Diagnostics still fails, ask whoever runs the proxy to allow the Cursor hosts.
A fixed exit for Cursor with Proxy302
Step 1
Open the static residential page, choose a country the provider supports and pick the HTTP protocol. A one-day lease is US$0.50, 30 days is US$7.99; there is no free trial.
Open My assets and copy HOST, PORT, USERNAME and PASSWORD. HTTP is on port 2222.
Step 3
Enter them in Cursor as the guide shows, restart, and check the exit country again. The SOCKS5 versus HTTP guide explains why HTTP is the simpler choice for an editor.
Why does Cursor say a model is not available in my region?
Some providers limit their models by location and Cursor hides them in affected regions; a Cursor staff reply says region comes from your IP address. Check your exit country first.
Is "unable to connect" the same as a region block?
No. A region block is consistent for one provider's models; a hang behind a proxy often points to HTTP/2 streaming, which "HTTP Compatibility Mode" set to "HTTP/1.1" addresses.
No. A proxy only changes the IP address Cursor sees. If that address is in a supported country the region reason is removed, but nothing is promised beyond that.
Set a proxy in Cursor with http.proxy, handle special characters in the password, switch to HTTP/1.1 when streaming hangs, and verify with Run Diagnostics.
The four official availability lists compared country by country — China, Hong Kong, Russia and more — plus hourly checks of the OpenAI and Anthropic APIs from 7 countries.
Cursor proxy settings on a fixed static ISP IP: http.proxy, HTTP/1.1 compatibility mode and a US exit — the region Cursor uses to decide which models you see.
Read on 19 November 2026. Some model providers restrict models by location, and those models are hidden in Cursor in affected regions; the page suggests Auto, another model enabled on your account, or your own API key under Cursor Settings > Models (which can still fail if the provider blocks your region); Grok 4.5 is available in every country where Cursor offers models; the page links to the Anthropic, OpenAI and Google supported-regions pages and gives no exact error text.
Read on 19 November 2026. Cursor Settings > Network > Run Diagnostics tests the connection to Cursor's servers; Cursor uses HTTP/2 for streaming and some proxies block it, so set "HTTP Compatibility Mode" to "HTTP/1.1" in Cursor Settings > Network and restart; a firewall should allow *.cursor.sh, *.cursor-cdn.com, *.cursorapi.com, cursor.com and *.cursor.com; the "suspicious activity" message can be triggered by VPNs (turn the VPN off, start a new chat, wait, retry). The page does not cover region errors.
Read on 19 November 2026. A user in Japan reports "This model is not available in your region" for OpenAI and Claude models while the Claude and ChatGPT apps work. A Cursor staff reply says Japan is supported by both providers, Cursor determines region from the IP address, a VPN or proxy that routes through a restricted country can trigger the block, and suggests Run Diagnostics, Auto mode, turning off any proxy or VPN and restarting; if that works, add *.cursor.sh and *.cursor.com to the bypass list or make sure the exit IP does not resolve to China. The thread does not confirm the final outcome.
Read on 19 November 2026: the page lists the countries, regions and territories Anthropic can support access from.
Proxy302 product facts and price list
Product observation · Confirmed on:
Product facts file of the site (values checked against the console, the backend and the price table on 18-19 October 2026): products, prices in US$ (1 PTC = US$1), lease terms, protocols and ports, countries, quantity limits, no free trial.
Ready to try it?
Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.