On a phone in China a Proxy302 static IP needs a link that reaches abroad first, with the static IP behind it.
Way 1: borrow the Proxy302 client on your computer: on its relay page tick “let phones and other computers on the LAN use it”, put the phone on the same Wi-Fi and enter the computer’s LAN address and your group’s port.
Way 2: on iPhone add a Shadowrocket node of type SOCKS5, set Proxy Through to your own node and turn UDP relay off. Way 3: on Android use Clash Meta for Android or FlClash and chain the static IP behind your node with dialer-proxy. A static IP is your fixed exit abroad, not a way out of China, so it cannot be entered on its own.
Example addresses (203.0.113.0/24), not real exits
01 / 12Why you cannot just enter it
Three ways to use an overseas static IP on a phone in China; pick one.
01
Why you cannot just enter it
The static IP is your landing IP abroad: websites see it. It does not carry the phone abroad. From China a direct connection to an overseas proxy address is unreliable and gets cut off on sites like Facebook, TikTok or Google, so the switch is on and the page keeps spinning. The IP is not broken and changing it will not help.
The fix is to put a link that reliably reaches abroad in front, with the static IP behind it: the relay of the Proxy302 client on a computer (way 1), or a node of your own that gets through, called the first-hop node here (ways 2 and 3).
02
Pick one of three
Pick one of three
Item
For whom
What you need
After the phone leaves this Wi-Fi
Way 1: borrow the Proxy302 client on your computer (try first)
Computer runs the Proxy302 client and the phone is on the same Wi-Fi; no node of your own needed
Computer and client stay on
Stops working
Way 2: Shadowrocket on iPhone, chained
iPhone with a node of your own that reaches abroad
Shadowrocket; the static IP must support SOCKS5
Keeps working
Way 3: Clash Meta on Android, chained
Android with Clash Meta for Android or FlClash and your own subscription link
Your subscription link; the static IP must support SOCKS5
Keeps working
Way 1 buttons and wording checked against Proxy302 client 3.5.4; ways 2 and 3 follow cases we have handled and the mihomo documentation.
In the Proxy302 console open My proxies, find the static IP and click Copy. You get one line, address:port:username:password; split on the colons for the four values.
Expected result You have address, port, username and password.
Step 2: Know each value
The address is proxy.proxy302.com or us.proxy302.com, as the console shows. HTTP is port 2222 and SOCKS5 is port 3333; which protocols this IP supports is what the console shows: most per-GB static IPs take both, one marked “HTTP only” takes HTTP only, and a per-IP rental shows only the type chosen at purchase. The username and password belong to this IP, not to your Proxy302 login.
04
Way 1, part 1: turn on LAN sharing on the computer (once)
Step 1: Connect the relay
Open the Proxy302 client and sign in. On the left click the relay page and wait until it shows as connected.
Step 2: Open manual entry
Open “Don’t want one-click boost? Fill in manually”.
Step 3: Tick LAN sharing
Tick “let phones and other computers on the LAN use it”. Allow the Windows firewall prompt; on a Mac choose Allow when it asks about incoming connections.
Expected result A line appears: “Opened: other devices use proxy host 192.168.x.x”. That is the computer’s LAN address; note it.
Before continuing The system proxy in My IPs (127.0.0.1:17890) is for this computer only; the phone cannot reach it, so do not use it. Use the group of ports below.
Step 4: Find your group’s ports
Scroll to the group for your proxy address (if the console gives us.proxy302.com, find the us group). It has an HTTP row and a SOCKS5 row, each with its own port, for example HTTP 12222 and SOCKS5 13333. Note both as your page shows them.
Step 5: Test (optional)
Click Test connection on a row to see whether the port answers. To check the login too, enter the console username and password in the optional account test on the same page and click Test; they are used for that test only and not saved.
Expected result It shows success and an exit IP.
05
Way 1, part 2: fill it in on the phone (choose A or B)
Option A: iPhone Wi-Fi proxy (simplest)
Put the iPhone on the computer’s Wi-Fi. Settings → Wi-Fi → ⓘ next to the network → Configure Proxy → Manual. Server: the computer’s LAN address. Port: the HTTP row’s port of your group (for example 12222). Turn on Authentication and enter this IP’s username and password, then Save.
Expected result ipinfo.io in Safari shows the static IP and country you bought.
Before continuing This iPhone setting is HTTP only, so use the HTTP port. It applies to this one Wi-Fi: on mobile data or another Wi-Fi the phone uses your own network, so do not open your accounts then, or use option B. Some apps ignore the Wi-Fi proxy; if an app does not load or shows the wrong IP, use option B.
Option B: add a SOCKS5 node in an app (Android uses this; iPhone can too)
Android’s own Wi-Fi proxy mostly has no username and password boxes. Use an app that takes a SOCKS5 login: v2rayNG or Clash Meta on Android, Shadowrocket on iPhone. Add a node: type SOCKS5; address: the computer’s LAN address; port: the SOCKS5 row’s port of your group (for example 13333); username and password of this IP; turn UDP relay off where there is such a switch; do not set Proxy Through, the computer already reaches abroad.
Expected result Select the node, switch on, and ipinfo.io in a browser shows the static IP and country you bought.
Check Same Wi-Fi? Guest Wi-Fi or a router with AP isolation hides the computer. Is the computer asleep, the client open and the relay connected?
Fix Use the same normal Wi-Fi, wake the computer and keep the client open. If you cancelled the Windows firewall prompt, tick the Proxy302 client under Allow an app through the firewall.
Worked yesterday, not today
Check The computer’s LAN address may have changed.
Fix Read the new address in the client and update the phone.
Asked for a login, or 407
Check Is it this IP’s username and password, not your Proxy302 login? Any extra space?
Fix Copy them again from the console.
Which address and port
Check On the phone use the computer’s LAN address and the port on the client page (such as 12222).
Fix Do not enter proxy.proxy302.com, 2222 or 3333; the computer uses those.
07
Way 2: iPhone, Shadowrocket behind your own node
Step 1: Check your own node works
Select it in Shadowrocket, turn it on and open a foreign site in Safari. If it does not open, fix it first; a static IP behind a broken node will not work either.
Step 2: Add the static IP node
Tap + at the top right: type SOCKS5; address, port, username and password from the console, with the SOCKS5 port (usually 3333); turn UDP relay off where there is such a switch; any remark, for example “Static-US”. You can also use Import to Shadowrocket from My proxies in the console on the phone; afterwards check that the type is SOCKS5.
Step 3: Set Proxy Through
Tap ⓘ next to the new node, choose your own node under Proxy Through, and save.
Step 4: Select the static IP node
Set Global Routing to Config, select the new node and switch on.
Step 5: Check
Open ipinfo.io in Safari, then ipleak.net: your own network’s IP should not appear.
Expected result ipinfo.io shows the static IP and country you bought.
08
Why SOCKS5 and UDP relay off
SOCKS5: in Shadowrocket an HTTP-type node behind another node has connected but sent no request, so pages never loaded; changing the type to SOCKS5 (port 3333) fixed it at once. If this IP is marked “HTTP only” in the console, this way may not work; use way 1.
UDP relay off: when it is on, some pages and apps hang and keep loading; with it off they fall back to ordinary connections. Note that voice and video calls in apps then do not go through the static IP, so check with ipleak.net in step 5.
09
Way 3: a new profile, imported whole
# Proxy302 static IP behind your own first-hop node (mihomo core: Clash Meta for Android, FlClash)
# Change five things only: the subscription url; server, port, username, password (from the console)
mode: rule
dns:
enable: true
enhanced-mode: fake-ip
nameserver:
- 223.5.5.5
- 119.29.29.29
proxy-providers:
my-sub:
type: http
url: "https://your-own-subscription-link"
path: ./providers/my-sub.yaml
interval: 86400
proxies:
- name: STATIC-IP
type: socks5
server: proxy.proxy302.com
port: 3333
username: "your-user"
password: "your-pass"
udp: false
dialer-proxy: FIRST-HOP
proxy-groups:
- name: FIRST-HOP
type: select
use:
- my-sub
rules:
# TikTok (both package names, so either version is covered)
- PROCESS-NAME,com.zhiliaoapp.musically,STATIC-IP
- PROCESS-NAME,com.zhiliaoapp.musically,REJECT
- PROCESS-NAME,com.ss.android.ugc.trill,STATIC-IP
- PROCESS-NAME,com.ss.android.ugc.trill,REJECT
# Facebook
- PROCESS-NAME,com.facebook.katana,STATIC-IP
- PROCESS-NAME,com.facebook.katana,REJECT
# Open ipinfo.io in the phone browser to check the exit
- DOMAIN-SUFFIX,ipinfo.io,STATIC-IP
- DOMAIN-SUFFIX,ipinfo.io,REJECT
# Everything else direct
- MATCH,DIRECT
Save as a .yaml file and change five things only: the subscription url, and server, port, username and password from the console. Each app gets two lines: the first sends it through the static IP, the second, REJECT, stops its UDP. The static IP node carries no UDP, and under mihomo’s rules UDP then goes on to the next rule; without the REJECT it would leave by another path, and with it the app falls back to an ordinary connection. Fields checked against the mihomo documentation, not run in every client.
Change the five values and put the .yaml file on the phone. Package names can be read after id= in the app’s Google Play web address; add two lines per extra app. Anything not listed goes direct.
Step 2: Import the whole file
In the app’s Profiles create one from a file, choose it, save and select it. Do not paste these lines into Override or Merge: rules written there replace the whole rule set, and everything usually goes direct.
Step 3: Pick the first-hop node
Start it. On the Proxy page choose a working node in the FIRST-HOP group. If the group is empty the subscription did not download: check the link and update it by hand.
Step 4: Check
Open ipinfo.io in Chrome, then TikTok or Facebook.
Expected result ipinfo.io shows the static IP and country you bought.
FAQ
Can a phone and a computer use the same IP at the same time?
Yes. The same username and password work on the computer and the phone together, and you do not buy anything extra; HTTP (2222) and SOCKS5 (3333) can also be used together. The target site may run its own checks on one account used from several devices, and that has nothing to do with the IP.
Which way should I pick?
If the computer runs the Proxy302 client and the phone shares its Wi-Fi, try way 1; on iPhone with a node of your own, way 2; on Android with your own subscription, way 3.
I only bought a static IP and have no node. Can the phone use it?
Yes, through way 1, borrowing the client on your computer. It stops when the computer is off or the phone leaves that Wi-Fi.
Add a Proxy302 HTTP or SOCKS5 proxy to Shadowrocket on iPhone: which boxes to fill, how to switch it on, how to check your exit IP and what to do on a restricted network.
Add a Proxy302 SOCKS5 proxy to v2rayNG on Android, test the connection and check your exit IP. HTTP-only datacenter IPs: use Postern, or get a SOCKS5 one.
Connected through a static IP but sites won’t load? Put it behind a link that gets through: 3 steps each for the client, Shadowrocket and Clash, plus split routing.
Proxy302 Official Client for Windows and Mac: manage all your IPs, open a separate Chrome window per IP in one click, and buy, top up and open tickets inside the app.
Further reading
Setup guides Proxy302 publishes on GitHub on the same topic:
Proxy302 client screens (checked against code 3.5.4)
Product observation · Confirmed on:
Checked by the client team against code 3.5.4: the “Don’t want one-click boost? Fill in manually” option on the relay page, “let phones and other computers on the LAN use it”, the “Opened: other devices use proxy host 192.168.x.x” line, the HTTP and SOCKS5 ports per proxy address group with “Test connection”, and the optional account test; the system proxy in My IPs is for the local computer only.
Checked by the client team against the mihomo documentation on 21 November 2026: the udp field of a socks5 node, dialer-proxy pointing to a group, PROCESS-NAME per app; when the node carries no UDP, UDP goes on to the next rule, hence a REJECT line after each app. The config here was not run in every client.
Ready to try it?
Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.