Skip to content

Updated

SessionBox Proxy Not Working:
3 Causes and a 6-Step Check

  1. When a proxy does not work in SessionBox One, the cause is usually one of three things: the Type in Manage proxies does not match the IP (HTTP on port 2222, SOCKS5 on port 3333; the form in our setup guide defaults to HTTPS), a field was filled in wrongly (Address, Port, Username or Password), or the IP or your own network is the problem.
  2. Test the same details with curl: if curl fails, SessionBox is not at fault; if curl works, check the form and which proxy the session was given.
  3. SessionBox's own pages say nothing about proxy errors, so this page works from what you can test.

Check it right after buyingExample output

curl -x http://USER:PASS@HOST:PORT https://ipinfo.io/json

ip
203.0.113.24
country
US
Matches the country you picked
Day 15
203.0.113.24
Same address for the whole term
Example addresses (203.0.113.0/24), not real exits
01 / 09The 3 most common causes

Three causes cover most failures. Test the proxy outside SessionBox, then check which proxy the session actually uses.

The 3 most common causes

Cause 1: the Type does not match the IP. The form in Settings, Manage proxies has a Type field, and in the screenshot of our setup guide it defaults to HTTPS. A Proxy302 entry on port 2222 is HTTP; on port 3333 it is SOCKS5. Set Type to the protocol on the connection card in My assets instead of leaving the default.

Cause 2: a field was filled in wrongly. The host goes in Address and the port in Port, and the login and password go in Username and Password. A swapped pair, a space at the end or a hand-typed password with special characters is enough. Use the copy buttons in My assets for each value.

Cause 3: the IP, your network, or the session uses a different proxy than you think. The lease may have ended, a VPN or firewall may be in the way, or the session was given another saved proxy by Proxy auto-assign or none at all. A curl test separates the first two from the third.

Check it in 6 steps

  1. Step 1: test outside SessionBox

    Open My assets, copy host, port, username and password, and run the curl command in the next block on the same computer. It should print the proxy's IP and country.

    Expected result JSON with the exit IP of the proxy.

    Before continuing If curl fails, stop here: the problem is the details, the lease or your network, not SessionBox.

  2. Step 2: set Type to the IP's protocol

    Go to Settings, Manage proxies, open the saved proxy and set Type to HTTP for port 2222 or SOCKS5 for port 3333. If you are unsure, use HTTP on 2222 and save.

  3. Step 3: fill in the fields again

    Put the host in Address and the port in Port, then paste Username and Password with the copy buttons in My assets. Look for a space at the start or end of each box.

  4. Step 4: look at the lease

    In My assets, check that the IP has not reached its end date. Auto-renew is optional and set per IP, so an IP with it off ends on its date.

  5. Step 5: remove what sits in between

    Turn off any VPN and any system-wide proxy on the computer while you test, and allow SessionBox through the firewall. On a restricted network, open Proxy302 Fast Connect before you use the proxy.

  6. Step 6: confirm the session uses the proxy

    Open a new session, go to an IP-check site such as https://ipinfo.io/json and compare the IP with the one in My assets. If it is your own IP, the session has no proxy: check Proxy auto-assign and its strategy in Settings, or assign the proxy to that session by hand.

    Expected result The IP and country of the proxy.

Test the proxy outside SessionBox

# 1) HTTP proxy (port 2222)
curl -x "http://LOGIN:PASSWORD@HOST:2222" https://ipinfo.io/json

# 2) SOCKS5 proxy (port 3333); socks5h lets the proxy resolve the host name
curl -x "socks5h://LOGIN:PASSWORD@HOST:3333" https://ipinfo.io/json

Example only: replace LOGIN, PASSWORD and HOST with the values from My assets; percent-encode special characters in the login.

Which protocol works where

Which protocol works where
ItemPortIf the Type in SessionBox does not match
Static ISP, rented per IPHTTP 2222, SOCKS5 3333Both protocols connected in our test of 4 November 2026
Static ISP billed per GBHTTP 2222, SOCKS5 3333Works only over the protocol it was bought with
Rotating residentialHTTP 2222, SOCKS5 3333The same username and password work over both HTTP and SOCKS5
Datacenter, rented per IPHTTP 2222, SOCKS5 3333Each IP has one protocol, chosen at purchase

Source: Proxy302 product facts file (protocol tests of 4 November 2026, one account, ipinfo.io through proxy.proxy302.com). The console marks the few per-GB assets that have only one protocol as HTTP only or SOCKS5 only.

Symptoms and what to do

Pages in the session do not load at all

Check Does curl with the same details work? Is Type the protocol on the connection card, not the default HTTPS?

Fix Fix Type and port first, then fill in the fields again.

Stop when If curl fails too, do not keep editing SessionBox; look at the lease and your network.

The session shows your own IP

Check Is the proxy assigned to this session, and what does Proxy auto-assign do with new sessions?

Fix Check the strategy under Settings, or assign the proxy to the session by hand, then reopen it.

It worked yesterday and fails today

Check Did the IP reach its end date, or did your computer's VPN or system proxy change?

Fix Check the end date in My assets; renew if needed, then reopen the session.

The IP is right but the country or language looks off

Check Are the session's timezone and locale settings in line with the IP's country?

Fix The setup guide mentions the Auto set proxy timezone and locale options in Settings; turn them on or set both by hand.

What SessionBox's pages say and do not say

The SessionBox pages we read do not list proxy error messages, name the Type options or describe how proxies are checked. The support page has no proxy information at all. So this page quotes no SessionBox error text; it uses the form fields, the checks that apply to any proxy and a test outside the app.

This page covers SessionBox One, the desktop app for Windows and macOS. The download page says an older version of the Chrome extension is still available from the Chrome Web Store; its settings may differ, and this page does not cover them.

Which Proxy302 IP for SessionBox

For an account that stays signed in to the same profile, a static ISP IP does not rotate during the lease: US$0.50 for 1 day or US$7.99 for 30 days (about US$0.27 a day). Give each session its own IP and keep its timezone and language in line with the IP's country.

There is no free trial; the smallest purchase is one IP for one day. If an IP stops working, write to Support with the order number and it is reissued.

FAQ

Why is my SessionBox proxy not working?

Usually the Type does not match the IP, a field was filled in wrongly, or the IP or your network is the problem. Test the same details with curl to tell which.

Why does the session show my own IP?

The session probably has no proxy assigned. Check Proxy auto-assign and its strategy in Settings, or assign the proxy to the session by hand, then compare the IP on https://ipinfo.io/json with My assets.

Should I choose HTTP or SOCKS5 in SessionBox?

The one on the connection card in My assets. If you are unsure, HTTP on port 2222 is the safer choice, because a credential generated as SOCKS5 also worked over HTTP in our test.

My IP stopped working. What now?

Check its end date in My assets, then write to Support with the order number; a failed IP is reissued.

Further reading

Setup guides Proxy302 publishes on GitHub on the same topic:

View all partners →

Reference links

6
  1. SessionBox blog: Proxy302 partnership

    Official documentation · Confirmed on:

    Read on 20 November 2026: Settings, Manage Proxies, Add proxies, then enter the IP address and port from the Proxy302 dashboard and click Create; back in the previous section the proxy can be assigned automatically, for example one proxy per session or one proxy for all existing sessions. The article names no Type options and mentions no errors or troubleshooting.

  2. SessionBox download page

    Official documentation · Confirmed on:

    Read on 20 November 2026: SessionBox One is a desktop app, described as optimized exclusively for Windows and macOS, with no mobile app; the page also says an older version of the Chrome extension can be downloaded from the Chrome Web Store.

  3. SessionBox support page

    Official documentation · Confirmed on:

    Read on 20 November 2026: the page has no information about proxies, proxy types, proxy authentication or proxy errors.

  4. Proxy302 SessionBox setup page

    Product observation · Confirmed on:

    The setup page of this site (/integrations/sessionbox), read on 20 November 2026: in Manage proxies the form has Name, Type, Address, Port, Username and Password; the screenshot shows Type on HTTPS by default; Proxy auto-assign has a strategy list and a Do not reuse active option, and Settings has Auto set proxy timezone and locale options.

  5. Proxy302 protocol tests, 4 November 2026

    Product observation · Confirmed on:

    Product facts file, tests of 4 November 2026 through proxy.proxy302.com with ipinfo.io: a rotating residential credential generated as SOCKS5 also worked over HTTP on 2222, one generated as HTTP failed over SOCKS5 on 3333; per-IP static leases connected over both protocols; per-GB static tokens connected only over the protocol they were bought with.

    Results are from one account on one day; the console marks per-GB tokens as HTTP only or SOCKS5 only.

  6. Proxy302 product facts and price list

    Product observation · Confirmed on:

    Product facts file of the site (values checked on 10 November 2026): protocols and ports, prices in US$ (1 PTC = US$1), lease terms, quantity limits, no free trial.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.