Skip to content

NSTBrowser Proxy Not Working: 5 Checks Before Swapping IP

When NSTBrowser will not connect through a proxy, check the network, the proxy URL, the profile's proxy and the IP term first.

The 3 most common causes

Network or firewall: Nstbrowser's page lists local network, router and firewall rules as a cause and advises adding Nstbrowser to the antivirus or firewall exceptions and allowing outbound traffic on the proxy port.

The proxy URL or type: a custom proxy is written host:port:account:password, and a SOCKS5 proxy needs socks5:// in front. A SOCKS5 line pasted without it, or a type that does not match the port, fails.

The wrong proxy or an expired IP: a profile can be tied to a saved group that picks a different proxy on each start, and a leased IP past its end date answers nothing.

What you see and where to look

What you see and where to look
ItemLikely causeWhere to look
Check Proxy fails on every lineNetwork, firewall, or the wrong format for the typeChecks 1 and 2
Only the SOCKS5 lines failsocks5:// missing in front of the lineCheck 2
The exit IP changes every time the profile startsThe profile uses a saved group with several proxiesCheck 3
A profile lost its proxy after you tidied the Proxies pageDeleting a group clears the proxy of profiles that used itCheck 3
It worked yesterday and fails todayIP past its end dateCheck 4, My assets

Built from the Nstbrowser documentation read on 17 November 2026 and the Proxy302 product facts.

Five checks, easiest first

  1. Step 1: Network, VPN and firewall

    Test on a different network, such as a phone hotspot. Temporarily turn off the firewall or antivirus to see whether it is the cause; if it is, add Nstbrowser as an exception and allow outbound traffic on the proxy port instead of leaving it off. Nstbrowser also notes that with Local selected a VPN on the computer changes the IP the site sees, so close other VPN or proxy tools while you test. In mainland China, start Proxy302 Fast Connect first and keep it open.

  2. Step 2: Proxy URL and type

    Custom proxies are HTTP, HTTPS or SOCKS5. Write the line as host:port:account:password; for SOCKS5 put socks5:// in front. In Proxy302 My assets each IP carries an HTTP or SOCKS5 tag: HTTP uses port 2222 and SOCKS5 port 3333. After you paste the line, the fields fill in on their own, so compare Protocol, Host and Port, Proxy Username and Proxy Password with My assets.

  3. Step 3: Is the profile using the proxy you think?

    Nstbrowser says a profile can pick from a saved proxy group, and with several proxies in the group one is chosen at random on each start. For a fixed IP give the profile its own single proxy. Deleting a group clears the proxy of every profile that used it, so a profile that suddenly connects directly lost its proxy this way.

  4. Step 4: Is the IP still valid?

    In My assets look at the end date of the IP, or the traffic left on rotating residential. Renew or generate again if it has run out. If the IP is within its term and still fails, open a Support ticket with the order number and it is reissued. A proxy bought inside NSTBrowser as its Platform Proxy is a separate product and is not a Proxy302 order.

  5. Step 5: Test outside NSTBrowser, then check again

    Run the command-line test below on the same computer. Nstbrowser also advises testing the proxy independently, trying another proxy and updating to the latest version. Then use Check Proxy on the Proxies page; the checker can be nstbrowser, iplook or ipinfo, so if one result looks odd try another.

Rule NSTBrowser out with the command line

Run this on the same computer. If it prints your proxy exit IP, the proxy works and the fault is what was entered in NSTBrowser (checks 2 and 3). A timeout or refusal points to the network or the IP term (checks 1 and 4).

Command-line test: example

curl -x http://USERNAME:PASSWORD@HOST:PORT https://ipinfo.io/json

# SOCKS5 (DNS is also resolved through the proxy)
curl -x socks5h://USERNAME:PASSWORD@HOST:PORT https://ipinfo.io/json

Example only: replace the capitalised placeholders with the values from My assets. Use the first line for an HTTP IP and the second for a SOCKS5 IP.

Reading the result

A JSON answer with the ip, country and organisation fields means the proxy is fine. A 407 means the account or password is wrong. The proxy connection guide goes further, and the 407 guide explains authentication errors.

When one thing keeps failing

Check Proxy fails on every proxy in the group

Check The command-line test on this computer

Fix If curl fails too, fix the network or firewall first. If curl works, clear the failed lines with Clear Failed, then add the lines again with the correct format.

Stop when Stop swapping IPs after two failures with the same symptom.

curl works but the profile will not load pages

Check Whether the profile is set to Local, to a saved group or to its own custom proxy

Fix Open the profile settings and set one custom proxy with the URL from My assets, then save and start it again.

Stop when If the profile still fails with a proxy that passes curl, send Support a screenshot and the order number.

It stopped after working for days

Check End date and traffic in My assets

Fix Renew, or generate a new IP and update it in the profile.

Stop when If the IP is within term and curl fails, open a ticket with the order number for reissue.

Enter a Proxy302 IP in NSTBrowser

  1. Step 1

    Log in to Proxy302, open the IP in My assets and copy the host:port:user:pass line. Note the HTTP or SOCKS5 tag.

  2. Step 2

    In NSTBrowser create or open a profile, choose the custom proxy option and paste the line into the proxy URL box. For SOCKS5 add socks5:// at the start.

  3. Step 3

    Compare the filled-in Protocol, Host and Port, username and password with My assets, then save and run Check Proxy.

  4. Step 4

    Start the profile and confirm the exit IP on an IP check page. For one account use one fixed IP and keep to the platform's terms. The full steps are on the NSTBrowser setup page.

FAQ

Why does Check Proxy fail for SOCKS5 lines only?

Nstbrowser's documentation puts a socks5:// prefix in front of SOCKS5 lines. Without it the line is read as a different type. Add the prefix and check again.

Does Check Proxy prove the proxy is broken?

No. A failure can come from the network, firewall, URL format, type or the IP term. The command-line test separates a bad IP from a bad entry.

Why does my profile's IP change on every start?

If the profile uses a saved proxy group with several proxies, Nstbrowser picks one at random each start. Give the profile a single proxy of its own for a fixed IP.

Which protocol and port should I use?

The one shown on the IP in My assets: HTTP on port 2222, SOCKS5 on port 3333. A static ISP IP leased per IP also works on the other protocol at that protocol's port.

What does a static IP cost?

From 1 day at US$0.50 up to 90 days; 30 days is US$7.99, about US$0.27 a day (7.99 divided by 30). There is no free trial.

View all partners →

Reference links

4
  1. Nstbrowser wiki: Proxy issues, troubleshooting and solutions

    Official documentation · Confirmed on:

    Read on 17 November 2026: causes (typos in IP, port or credentials; proxy down; blocked IPs; network or firewall limits; expired plan; unsuitable type) and steps (verify settings and type HTTP, HTTPS or SOCKS5; test the proxy independently; add Nstbrowser to the firewall or antivirus exceptions and allow the proxy port; try another proxy; update Nstbrowser; ask the provider). The page lists no error messages and no button names.

  2. Nstbrowser docs: Proxy

    Official documentation · Confirmed on:

    Read on 17 November 2026: HTTP, HTTPS and SOCKS5 custom proxies in the form host:port:account:password, with a socks5:// prefix for SOCKS5; pasting a proxy URL fills the fields; Check Proxy tests the added proxies and Clear Failed removes the failed ones; checkers nstbrowser, iplook and ipinfo; up to 100 proxies per group; deleting a group clears the proxy of every profile that used it; with Local selected a VPN changes the IP the site sees.

  3. Nstbrowser docs: Create a profile

    Official documentation · Confirmed on:

    Read on 17 November 2026: proxy is optional and no proxy IP is used when left blank; the options are Local and custom; custom accepts host:port:account:password; saved proxy groups let a profile pick a proxy from the group, and with several proxies in the group one is picked at random on each start.

  4. Proxy302 product facts

    Product observation · Confirmed on:

    Product facts file of the site (checked 17 November 2026): HTTP on port 2222, SOCKS5 on port 3333; a static ISP IP leased per IP is issued with one protocol and also connects over the other protocol on its port; prices from US$0.50 for 1 day and US$7.99 for 30 days; a failed asset is reissued after a Support ticket with the order number.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.