Skip to content

Maskfog Proxy Not Working: 5 Checks When Check Proxy Fails

When Maskfog cannot connect through a proxy, the cause is usually the local network, the type, a field or the IP term.

The 3 most common causes

Local network: Maskfog's help says proxy failures at browser start are usually this, and tells you to confirm that your local IP is outside China. A network that cannot reach the proxy host and port fails before the proxy answers.

Type or fields: the proxy type must match what the IP speaks, and Proxy Type, Proxy Host, Proxy Port, Proxy Username and Proxy Password are separate fields. One wrong character, or a scheme pasted into the host box, fails the check.

The IP itself: a leased IP past its end date, or rotating residential traffic that has run out, answers nothing, and from Maskfog it looks the same as a typing mistake.

What you see and where to look

What you see and where to look
ItemLikely causeWhere to look
Check Proxy fails right awayWrong type, host, port or credentialsChecks 2 and 3 below
It worked yesterday and fails todayIP past its end date or traffic used upCheck 4, My assets
Check passes but a page will not loadNetwork to the site, not the proxy loginCheck 1, then the command-line test
A name and password pop-up appears with SOCKS5Maskfog notes this can happen; enter the credentialsThe note under Check 5
The page loads but the country looks wrongLocation data differs between checkersThe IP geolocation guide

Built from the Maskfog help pages read on 17 November 2026 and the Proxy302 product facts; the last row is not from Maskfog.

Five checks, easiest first

  1. Step 1: Is your own network fine and online abroad?

    Open Global Settings > Team Network > Check Proxy in Maskfog to see the IP of your own computer; Maskfog says it should be outside China. If your computer is in mainland China and can already reach overseas sites, start Proxy302 Fast Connect first and keep it open, then check again. If you are outside China, move on.

  2. Step 2: Does the type match the IP?

    In the proxy window set Proxy Type to HTTP, HTTPS or SOCKS5. In Proxy302 My assets each IP shows an HTTP or SOCKS5 tag next to its entry address: HTTP uses port 2222 and SOCKS5 port 3333. A static ISP IP leased per IP also answers on the other protocol at that protocol's port. Type and port must agree with each other.

  3. Step 3: Are all five fields right?

    Open Proxy Service > Custom Proxy > Proxy Edit and compare Proxy Host, Proxy Port, Proxy Username and Proxy Password with My assets, character by character and without spaces. Copy them with the copy button instead of typing. In batch import the Excel column proxytype takes http, https or socks5, and the proxy column takes host:port:account:password with no scheme in front.

  4. Step 4: Is the IP still valid?

    In My assets look at the end date of the IP, or the traffic left for rotating residential. Renew or generate again if it has run out. If it is within its term and still fails, open a Support ticket with the order number and it is reissued. If you use Maskfog's own official proxy instead, Maskfog tells you to contact its online customer service.

  5. Step 5: Test the same proxy outside Maskfog

    Run the command line test below on the same computer. Maskfog's own help also describes loading the proxy into the SwitchyOmega Chrome extension and opening whoer.net or iplocation.net: the IP shown should be the proxy IP, and cannot get access to proxy server means check the details, the IP's validity and whether your network can reach the proxy host. With SOCKS5 a pop-up for name and password may appear; enter them and continue.

Rule Maskfog out with the command line

Run this in a terminal on the same computer. If it prints your proxy exit IP, the proxy works and the fault is in what was entered in Maskfog (checks 2 and 3). If it times out or is refused, look at checks 1 and 4.

Command-line test: example

curl -x http://USERNAME:PASSWORD@HOST:PORT https://ipinfo.io/json

# SOCKS5 (DNS is also resolved through the proxy)
curl -x socks5h://USERNAME:PASSWORD@HOST:PORT https://ipinfo.io/json

Example only: replace the capitalised placeholders with the values from My assets. Use the first line for an HTTP IP and the second for a SOCKS5 IP.

Reading the result

A JSON answer with the ip, country and organisation fields means the proxy is fine. A 407 means the account or password is wrong; a timeout or a refusal points to the network or the IP term. The proxy connection guide goes further and the 407 guide explains authentication errors.

When one thing keeps failing

Check Proxy fails on every IP you try

Check The same command-line test on this computer

Fix If curl also fails, fix the network first (Fast Connect if you are in mainland China, or a different network to test). If curl works, delete the proxy in Maskfog and enter the five fields again by hand.

Stop when Stop swapping IPs after two failures with the same symptom; the cause is on your side of the connection.

It passes in curl but Maskfog still fails

Check Type and port in Maskfog against the tag in My assets

Fix Set the type to match the port: HTTP with 2222, SOCKS5 with 3333. Then re-enter username and password without spaces.

Stop when If type, port and credentials are right and it still fails, send Support a screenshot of the error and the order number.

It worked and then stopped

Check End date and traffic in My assets

Fix Renew, or generate a new one and update it in Maskfog. A saved proxy that several profiles use changes for all of them.

Stop when If the IP is within term and curl fails, open a ticket with the order number for reissue.

Enter a Proxy302 IP in Maskfog

  1. Step 1

    Log in to Proxy302, open the IP in My assets, note the HTTP or SOCKS5 tag and copy host, port, username and password.

  2. Step 2

    In Maskfog open the custom proxy window. Maskfog's help calls it Proxy Service > Custom Proxy > Proxy Edit; Proxy302's tutorial shows New Browser > Custom Device > Add Device. Names differ by version.

  3. Step 3

    Set the type to match the tag and fill in the fields, then click Check Proxy (called Check Device in the tutorial) and save when it passes.

  4. Step 4

    Open the profile and confirm the exit IP on an IP check page; it should be the IP in My assets. For one account use one fixed IP and keep to the platform's terms.

FAQ

Why does Maskfog say the proxy failed when it works elsewhere?

Maskfog fills its own five fields, so a wrong type, a scheme left in the host box or a stray space fails the check even when the IP is fine. Compare each field with My assets and check the type against the port.

Is Maskfog's Check Proxy the same as the proxy being down?

No. A failed check can come from your network, the type, a field or the IP term. The command-line test separates a bad IP from a bad entry.

Should I use HTTP or SOCKS5 in Maskfog?

Use the one shown on the IP in My assets, with its port: HTTP on 2222, SOCKS5 on 3333. A static ISP IP leased per IP also works on the other protocol at that protocol's port.

Why does a name and password pop-up appear?

Maskfog's help says it can appear with SOCKS5. Enter the username and password from My assets and continue; if it keeps coming back, check them for typos.

How long does a static IP last, and what does it cost?

From 1 day at US$0.50 up to 90 days; 30 days is US$7.99, about US$0.27 a day (7.99 divided by 30). There is no free trial.

Reference links

4
  1. Maskfog help center: How to check your proxy

    Official documentation · Confirmed on:

    Read on 17 November 2026: proxy failures when opening a browser are usually local network problems; confirm the local IP is outside China under Global Settings > Team Network > Check Proxy; custom proxy check under Proxy Service > Custom Proxy > Proxy Edit > Check Proxy; if the test fails contact the proxy provider; a SwitchyOmega test with whoer.net or iplocation.net; the message "cannot get access to proxy server"; with SOCKS5 a pop-up asking for name and password may appear.

  2. Maskfog help center: HTTP Proxy

    Official documentation · Confirmed on:

    Read on 17 November 2026: Single Import fields Proxy Type, Proxy Host, Proxy Port, Proxy Username, Proxy Password and a Check Proxy button; batch import Excel columns proxytype (http, https or socks5) and proxy in the form host:port:account:password; supported types HTTP, HTTPS, SOCKS5.

  3. Proxy302 tutorial: Maskfog setup

    Product observation · Confirmed on:

    Read on 17 November 2026: in the Proxy302 tutorial the same steps appear as New Browser > Custom Device > Add Device, a device type of HTTP or SOCKS5, and a Check Device button. Menu names therefore differ between versions.

  4. Proxy302 product facts

    Product observation · Confirmed on:

    Product facts file of the site (checked 17 November 2026): HTTP on port 2222, SOCKS5 on port 3333; a static ISP IP leased per IP is issued with one protocol and also connects over the other protocol on its port; prices from US$0.50 for 1 day and US$7.99 for 30 days; a failed asset is reissued after a Support ticket with the order number.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.