Skip to content

Fingerprint Browser vs VM vs VPS: The IP Differences

Only the IP side: where each setup gets its public address, and what to set so each account has its own fixed one.

Why the IP side differs

A fingerprint (antidetect) browser keeps many separate browser profiles on one computer, and each profile has its own proxy setting. A virtual machine is a whole second operating system on your computer. A VPS is a computer you rent in a data center and reach over the internet. All three can run several accounts, but they get their public IP in different ways.

Whichever you pick, the rule for accounts you keep is the same: one account uses one fixed IP, accounts are not handed to other people, and you follow each platform's terms and supported regions. Which tool you use does not change that.

Three setups, side by side

Three setups, side by side
ItemWhere the public IP comes from by defaultHow to give it its own IPFits when
Fingerprint browser profileThe computer's own network, same address for every profileSet a proxy in each profile's own settingsMany accounts on one computer, one IP each
Virtual machine on your computerUsually the host computer's network, so the same public address as the hostSet a system proxy inside each VM, or use a proxy-aware app in itSeparate system environments, for example a different operating system per account
VPSThe server's own address, one per server, usually from a hosting networkRun the browser on the VPS, or send traffic from it through a proxyA machine that stays on all day, or work that must run from a server

Our summary of the VirtualBox manual and Microsoft Learn pages read on 16 November 2026, plus how proxy settings work in general. Your own network setup can differ, so run the self-check below.

What the VM manuals say about the address

VirtualBox's default NAT mode gives the guest a private address, and outside traffic appears to come from the host's IP. In bridged mode the guest connects directly to a host network adapter and is visible on the physical network. Hyper-V is similar: an external virtual switch lets virtual machines connect to an external network, and its NAT option combines the host computer's IP address with a port.

In an ordinary home or office setup, that means several VMs on one computer leave through the same router and therefore show the same public IP. Starting more virtual machines does not give each one its own address; the proxy does.

What a VPS changes, and what it does not

A VPS gives you one IP that belongs to the hosting provider's network. IP databases such as IPinfo label connections as isp or hosting from IP behaviour and public network records, and a server address is commonly labelled hosting. Check the one you get instead of assuming, with the IP type guide below.

You also get exactly one address per server. If you need a different country or a separate address per account, you either rent more servers or send the traffic through a proxy. For a personal browser account, a static ISP IP in the right country is the simpler fit; for a program that must run on a server, a VPS plus a proxy is the usual combination.

Self-check: which public IP does each environment show

# 1) On the host computer, without a proxy
curl -s https://ipinfo.io/json

# 2) Inside the virtual machine (or on the VPS), without a proxy
curl -s https://ipinfo.io/json

# 3) Inside the same environment, through the proxy you set up
curl -x "http://LOGIN:PASSWORD@HOST:PORT" -s https://ipinfo.io/json

Example; replace LOGIN, PASSWORD, HOST and PORT with the values from your console. Compare the ip and org fields of the three results.

Decide in four steps

  1. Step 1: do you need a separate operating system?

    If a browser profile is enough, a fingerprint browser is the lightest option. If an app only runs on another OS, or you want a hard wall between environments, use a VM.

  2. Step 2: does it have to run all day on a server?

    Scheduled jobs and bots fit a VPS. A browser you log in to by hand rarely needs one.

  3. Step 3: count the accounts you keep

    Plan one static IP per account you keep, in the country the account belongs to. Ten such accounts on a 30-day lease cost 10 × US$7.99 = US$79.90.

  4. Step 4: set the proxy in the place that matters

    Put the proxy in each browser profile, or inside each VM, or on the VPS. Then run the three commands above and confirm each environment shows its own address.

When the address is not what you expect

Every profile or VM shows the same IP

Check A profile with no proxy, or a VM with no system proxy, uses the computer's own network.

Fix Set the proxy in that profile or inside that VM and run the check again.

The proxy works on the host but not inside the VM

Check Check that the VM has network access at all, then the proxy address, port, HTTP or SOCKS5 and the login and password.

Fix Fix the setting. If a SOCKS5 login is the problem in a browser, see the SOCKS5 login guide.

Stop when If curl works but the app does not, the app, not the IP, is the problem.

The VPS address is labelled hosting

Check That is common for server addresses and is not a fault of the VPS.

Fix For a personal browser account, use a static ISP IP instead and keep the VPS for work that runs on the server.

Give each environment its own IP with Proxy302

  1. Step 1: order one static ISP IP per environment

    Choose the country, a term of 1 to 90 days and the protocol (HTTP on port 2222 or SOCKS5 on port 3333). A 1-day lease is US$0.50 and a 30-day lease is US$7.99, the same in every country; quantity goes up to 100 per order. Availability by country is shown on the order page.

  2. Step 2: enter the IP in the profile, the VM or the VPS

    Copy host, port, login and password from My assets. Auto-renew is optional and on by default for a new purchase; untick it if you do not want the lease to renew.

  3. Step 3: confirm and keep it

    Run the self-check, then keep that account on that IP. If an IP does not work, open a Support ticket with the order number and it is reissued.

Fingerprint browser, VM or VPS: FAQ

Does a virtual machine give me a different IP?

Not by itself. In VirtualBox's default NAT mode, outside traffic appears to come from the host's IP. A proxy set inside the VM gives it its own address.

Do I need a VPS to run a fingerprint browser?

No. It runs on your own computer, with a proxy per profile. A VPS is only needed if the work has to run on a server all day.

Is a VPS IP the same as a residential IP?

Usually not: server addresses are commonly labelled hosting, while a static ISP IP is labelled isp. Check any IP with an IP type checker.

How many IPs do I need for ten accounts?

Ten, one per account you keep. On a 30-day lease that is 10 × US$7.99 = US$79.90.

Which protocol should I pick?

HTTP (port 2222) works almost everywhere. Choose SOCKS5 (port 3333) if the app asks for it; each IP is issued with the protocol you chose.

Reference links

4
  1. Proxy302 product facts and price list

    Product observation · Confirmed on:

    Product facts file of the site, read 16 November 2026: no free trial; static ISP lease US$0.50 for 1 day and US$7.99 for 30 days, the same price in every country; availability by country is shown on the order page and changes daily; HTTP or SOCKS5 chosen per IP; auto-renew is optional.

  2. VirtualBox manual: virtual networking

    Official documentation · Confirmed on:

    Read on 16 November 2026: in the default NAT mode the guest gets a private address and outside traffic appears to come from the host's IP; in bridged mode the guest connects directly to a host network adapter and is visible on the physical network.

  3. Microsoft Learn: Hyper-V virtual switch

    Official documentation · Confirmed on:

    Read on 16 November 2026: virtual switch types are external, internal and private; an external switch lets virtual machines connect to an external network; NAT gives a virtual machine access to the computer's network by combining the host computer's IP address with a port.

  4. IPinfo community: how connection types are decided

    Official documentation · Confirmed on:

    Read on 16 November 2026: IPinfo labels connections as isp or hosting (among other types) from IP behaviour and public network records.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.