Skip to content

Updated

DICloak Proxy Error:
Check Failed or Won't Connect

  1. When Checking Proxy fails in DICloak, the help page tells you to verify the details you entered and confirm the proxy is still active.
  2. In practice the most common causes are the proxy type not matching the port (HTTP is port 2222 and SOCKS5 is port 3333 on Proxy302), a wrong host, port, account or password, and a lease that has ended.
  3. Fix them in that order, then test the same proxy outside DICloak with curl.

Check it right after buyingExample output

curl -x http://USER:PASS@HOST:PORT https://ipinfo.io/json

ip
203.0.113.24
country
US
Matches the country you picked
Day 15
203.0.113.24
Same address for the whole term
Example addresses (203.0.113.0/24), not real exits
01 / 07The three most common causes

Most failed checks come from a type that does not match the port, a mistyped field or a proxy that has expired.

The three most common causes

1. Type and port do not match. DICloak offers HTTP, HTTPS and SOCKS5 as proxy types. On Proxy302 one login works over HTTP on port 2222 and SOCKS5 on port 3333 for rotating residential, while a static IP is issued with the one protocol you chose at purchase.

2. A mistyped field. The form has Proxy Host, Proxy Port, Proxy Account and Proxy Password, and a missing character or a space copied with the value is enough to fail the check.

3. The proxy is no longer active. The DICloak help page says to confirm the proxy is still active; a per-IP lease ends on its end date, and a pay per GB line stops when its traffic runs out.

Checks in order

  1. Step 1

    Open Proxies > Create Proxy (or Edit on a saved proxy) and set Proxy Type to match the port: HTTP for 2222, SOCKS5 for 3333.

  2. Step 2

    Copy Proxy Host, Proxy Port, Proxy Account and Proxy Password from My assets instead of typing them, and watch for spaces at the ends.

  3. Step 3

    In My assets check that the IP's term has not ended or that the traffic balance is not used up.

  4. Step 4

    Press Checking Proxy again, or Test Connection on the saved proxy.

  5. Step 5

    If it still fails, test the same proxy outside DICloak with curl or a browser to find out whether the proxy or DICloak is the problem.

Test the proxy outside DICloak

# HTTP type (port 2222 on Proxy302)
curl -x http://LOGIN:PASSWORD@HOST:PORT https://ipinfo.io/json

# SOCKS5 type (port 3333 on Proxy302)
curl -x socks5h://LOGIN:PASSWORD@HOST:PORT https://ipinfo.io/json

Example only: replace the placeholders with the values from My assets.

Symptoms and what to do

Checking Proxy fails at once

Check Proxy Type against the port, then the four fields.

Fix Switch the type to match the port and paste the fields again from My assets.

Stop when If curl with the same values also fails, the proxy details or the lease are the problem.

Check passes but the profile does not open

Check Whether the profile uses that saved proxy, and whether another VPN or proxy is running on the computer.

Fix Open the profile's proxy settings and pick the saved proxy again; turn off other proxy or VPN software for a test.

Stop when If it opens without the other software, keep it off for DICloak.

It worked yesterday and fails today

Check The term or traffic balance in My assets.

Fix Renew the IP or add traffic, then check again.

Stop when Auto-renew is optional and on by default for a new purchase; check it in My assets.

Where the problem usually sits

Where the problem usually sits
ItemSignFix
Type and portCheck fails at once, curl fails too.Match the type to the port.
Typed valuesCheck fails, the values were typed by hand.Copy from My assets.
Lease or traffic endedWorked before, fails now.Renew or add traffic.
Your own networkCurl works on one network, not on another.Turn off other VPN or proxy software and check the firewall.

Checks based on the DICloak help page read 20 November 2026 and Proxy302 product facts.

Questions about DICloak proxy errors

Why does DICloak say the proxy check failed?

The help page points to the entered details and to whether the proxy is still active. Check type against port, the four fields, and the term in My assets.

Which type do I choose in DICloak for Proxy302?

HTTP for port 2222 and SOCKS5 for port 3333. A static IP is issued with the protocol chosen at purchase, so pick the type that matches that asset.

Where is the Checking Proxy button?

On the Create Proxy form under Proxies. A saved proxy has Test Connection on the Proxies page.

Should I test the proxy outside DICloak?

Yes. If curl through the same proxy fails too, the cause is the proxy details or the lease, not DICloak.

Further reading

Setup guides Proxy302 publishes on GitHub on the same topic:

View all partners →

Reference links

2
  1. DICloak Help Center: How Can I Create a Proxy?

    Official documentation · Confirmed on:

    Read on 20 November 2026: Proxies > Create Proxy; Custom Proxy or API Extraction; proxy types HTTP, HTTPS and SOCKS5; fields Proxy Type, Proxy Host, Proxy Port, Proxy Account, Proxy Password and optional Remarks; the Checking Proxy button tests the connection, and if it fails the page says to verify the entered details and confirm the proxy is still active; after saving, the Proxies page offers Test Connection, Edit, Copy Information and Delete.

  2. Proxy302 product facts and price list

    Product observation · Confirmed on:

    Product facts file of the site (values checked against the console, the backend and the price table on 18-19 October 2026): products, prices in US$ (1 PTC = US$1), lease terms, protocols and ports, countries, quantity limits, no free trial.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.