Pages do not open after Set proxy
Check Does the same string work in curl? Is the protocol in the string the one the IP was bought with?
Fix Use http with port 2222 or socks5 with port 3333 to match the IP, as shown in My assets.
Where a proxy is set in a ZennoPoster project, which string format the documentation lists, and how to give each thread its own proxy and check it.
There are two actions to know. Browser settings has a Set proxy property that installs a proxy from a variable or from a string. Get proxy, in the Proxychecker group, returns the project’s current proxy into a variable or takes a proxy from ProxyChecker; the documentation says a proxy taken this way must still be installed with the Browser settings action.
The project settings also have a proxychecker section. Use it when the whole project takes proxies by one rule; use the actions when a step needs its own proxy.
| Item | Use it when | What to know |
|---|---|---|
| Set proxy with a string | One fixed proxy per account or per project | Keep the account and its proxy together, for example in one table row |
| Set proxy with a variable | The proxy comes from a table, a file or an earlier step | The variable must hold the full string in the documented format |
| Get proxy from ProxyChecker | A list of proxies for a scraping or posting job | Taken by rule, or in sequence without rules; install it afterwards with Browser settings |
Source: ZennoLab help pages Browser settings and Using a proxy, read on 17 November 2026.
# Proxy string formats that ZennoLab's documentation lists for the Set proxy action
# With login and password: protocol://login:password@ip:port
# Without login and password: protocol://ip:port
# protocol is http, socks4 or socks5; without a protocol the default is http
http://USERNAME:PASSWORD@HOST:2222 # HTTP, port from My assets
socks5://USERNAME:PASSWORD@HOST:3333 # SOCKS5, port from My assets
# Before the project: the same string in a terminal. If curl works, the account details are right.
curl -x "http://USERNAME:PASSWORD@HOST:2222" https://ipinfo.io/jsonFormat taken from ZennoLab’s Browser settings page. Replace HOST, PORT, USERNAME and PASSWORD with the values from My assets.
Run the curl line from the code block above in a terminal. If it prints JSON with an IP and a country, the host, port, protocol and login are correct, and any later error is in the project.
Expected result A JSON answer from ipinfo.io with the proxy’s IP.
Add the action by Add action, Browser, Settings, choose the Set proxy property and give it the string or the variable. If you use Get proxy, run it first.
Place the action at the start of the template, before any navigation, so the first request already goes through the proxy.
Open https://ipinfo.io/json in the project browser and read the page. The IP must be the proxy’s, not your own. ZennoLab’s documentation says the active proxy is also shown at the bottom of the browser window.
Expected result The IP and country of the proxy.
For a job that runs the template in several threads, take the proxy inside the template, not once for the whole project: put Get proxy and Set proxy at the start, so every run installs its own. The documentation says that without rules proxies are taken in sequence, and that a checkbox removes a proxy from the live list after it is received.
What the documentation does not say is how simultaneous threads share one list. So write the proxy each thread received into the log, together with the ipinfo.io answer, and compare for duplicates on a short run before you start the long one.
For accounts, do not rotate. Keep one account on one fixed IP, do not share accounts between threads, and follow each platform’s terms and supported countries. If a platform asks for verification, complete it honestly.
| Item | Price | How it behaves |
|---|---|---|
| Rotating residential | US$1.50 per GB (Budget line), US$5 per GB (Premium line) | Without a session, every new connection gets a new IP; one login works over HTTP (2222) and SOCKS5 (3333) |
| Static ISP | US$0.50 for 1 day, US$7.99 for 30 days per IP | The IP stays the same during the lease; one protocol per IP, chosen at purchase |
| Datacenter per IP | US$0.25 for 1 day, US$3.99 for 30 days per IP | A fixed IP at a lower price; one protocol per IP |
Source: Proxy302 product facts, checked 10 November 2026. Static ISP and datacenter prices are the same in every country.
Check Does the same string work in curl? Is the protocol in the string the one the IP was bought with?
Fix Use http with port 2222 or socks5 with port 3333 to match the IP, as shown in My assets.
Check Is the Set proxy action placed before the first navigation, and did it run? Was a proxy from Get proxy installed afterwards?
Fix Move the action to the start and read ipinfo.io/json right after it.
Check Is the login or password copied fully? Has the IP’s term ended? A special character in the password may be read differently.
Fix Copy the details again from My assets and test them with curl. ZennoLab’s page does not describe escaping, so if curl works and ZennoPoster does not, send support the order number.
Stop when If curl also fails, stop editing the project and fix the proxy details first.
Check With rotating residential, does the log show one connection reused? With a list, was a proxy taken twice?
Fix Compare the proxy variable logged by each thread; give every thread its own proxy or its own session.
Choose the product for the job from the table above on the automation page. There is no free trial; the smallest purchases are 1 GB of rotating residential traffic or one IP for one day.
Open My assets and copy HOST, PORT, USERNAME and PASSWORD.
Build the string protocol://USERNAME:PASSWORD@HOST:PORT, test it with curl, then give it to Set proxy as in the steps above.
Expected result ipinfo.io shows the IP and country you bought.
ZennoLab’s documentation gives protocol://login:password@ip:port with authorization and protocol://ip:port without it. The protocol is http, socks4 or socks5, and http is the default.
The format page lists socks5 as a protocol. Use it only with an IP bought as SOCKS5 (port 3333); a rotating residential login also works over SOCKS5 on port 3333.
Take the proxy inside the template with Get proxy and install it with Set proxy. The documentation says proxies are taken in sequence without rules; it does not describe parallel threads, so log what each thread receives.
Open https://ipinfo.io/json in the project browser after Set proxy and compare the IP with your own. The active proxy is also shown at the bottom of the browser window.
There is no free trial. The smallest purchases are 1 GB of rotating residential traffic or one IP for one day.
Official documentation · Confirmed on:
Read on 17 November 2026: the Browser settings action is added by Add action, Browser, Settings; its Set proxy property sets a proxy from a variable or from a string; ZennoPoster uses protocol://login:password@ip:port with authorization and protocol://ip:port without; protocol can be http, socks4 or socks5, and http is the default.
The page does not describe how special characters in a password are handled.
Official documentation · Confirmed on:
Read on 17 November 2026: the Get proxy action (Add action, Proxychecker, Get proxy) returns the project’s current proxy into a variable or takes one from ProxyChecker by rule; without rules proxies are taken in sequence; a checkbox removes the proxy from the live list after it is received; after receiving a proxy it must be installed with the Browser settings action; the active proxy is the one installed by Set proxy and is shown at the bottom of the browser window.
Official documentation · Confirmed on:
Read on 17 November 2026: project settings have three sections, browser settings, proxychecker settings and HTTP settings; a saved configuration keeps the Browser and Proxychecker tabs, not the HTTP tab.
Official documentation · Confirmed on:
Read on 17 November 2026: ProxyChecker loads proxies from sources, stores them and rechecks them by configurable criteria; the version built into ZennoPoster cannot export the proxy list.
Product observation · Confirmed on:
Product facts file of the site, checked 10 November 2026 against the console, the backend and the price table: rotating residential on proxy.proxy302.com with one login for HTTP (port 2222) and SOCKS5 (port 3333), Budget line US$1.50 per GB and Premium line US$5 per GB, traffic does not expire; static ISP US$0.50 for 1 day and US$7.99 for 30 days per IP; datacenter US$0.25 for 1 day and US$3.99 for 30 days per IP; one protocol per leased IP; quantity up to 100 per order; no free trial.
Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.