Windows Proxy Server Error: Reset the System Proxy
Wording varies ("Proxy server error", "The proxy server isn't responding", "Unable to connect to the proxy server"), but the usual cause is the same: Windows still points at a proxy that is no longer running.
Open Settings > Network & internet > Proxy, turn off "Use a proxy server" and any stale setup script, then run netsh winhttp reset proxy in an administrator Command Prompt and restart the app.
Example addresses (203.0.113.0/24), not real exits
01 / 09The 3 most common causes
When a proxy tool leaves a dead proxy behind, every browser and app on Windows fails. Here is how to find it and reset it.
01
The 3 most common causes
1. A proxy tool set a manual proxy (often a local address such as 127.0.0.1 with a port) and was closed or crashed without clearing it, so Windows still sends traffic to a port nobody listens on.
2. "Use setup script" or "Automatically detect settings" points to a script address that no longer answers.
3. The WinHTTP proxy is set separately. Microsoft documents it as the setting for apps that use WinHTTP, and it is not the page you edit under Settings, so it can stay wrong after you turn the proxy off there.
A fourth case, only in Chrome and Edge: Chrome takes its proxy from the system unless a policy, a command-line flag or a browser add-on sets another one.
Open Settings > Network & internet > Proxy. Under Manual proxy setup, click Set up next to "Use a proxy server", turn it off and click Save.
Step 2
On the same page, check "Use setup script". If it is on and you do not use a script, turn it off. Leave "Automatically detect settings" on unless your network needs it off.
Step 3
Open Command Prompt as administrator and run netsh winhttp show proxy. If it lists a proxy server, run netsh winhttp reset proxy, which sets it back to direct access.
Step 4
Close the browser or app fully and open it again, then load a page. Run curl https://ipinfo.io/json in a terminal: with no proxy it shows your own address.
Step 5
If the proxy comes back after a restart, something is setting it again: a proxy tool that applies a system proxy on start, or a work or school policy. Turn off that tool's system proxy option, or ask your administrator.
03
Check and reset the WinHTTP proxy
REM Run in Command Prompt as administrator
netsh winhttp show proxy
netsh winhttp reset proxy
netsh winhttp show proxy
REM Check your own address without any proxy
curl https://ipinfo.io/json
Example only. netsh winhttp reset proxy sets the WinHTTP proxy to DIRECT; it does not touch the Settings page toggles.
04
Symptom, check and action
Every site fails in Chrome or Edge, with the proxy toggle off
Check Open chrome://policy and the add-ons page for a proxy set there, and look for a --proxy-server flag in the shortcut.
Fix Remove the add-on or flag. A policy comes from your administrator.
Stop when If chrome://policy shows a proxy you did not set and the PC is managed, stop and ask the administrator.
Windows Update or Microsoft Store fails, the browser works
Check Run netsh winhttp show proxy.
Fix Run netsh winhttp reset proxy as administrator.
Stop when Do not edit the registry by hand before trying the command.
The Settings page shows a proxy such as 127.0.0.1 and a port
Check The tool that owns that port is closed.
Fix Turn the toggle off, or start the tool and use its own switch to clear the system proxy.
Stop when If it returns every time, uninstall or reconfigure the tool.
05
Use a Proxy302 IP without a system-wide switch
After the reset, keep a Proxy302 IP out of the system settings: set it in the one browser profile or app that needs it, so a leftover setting cannot break everything else. Chrome does not support SOCKS5 with a username and password, so for a browser buy a static IP with the HTTP protocol (port 2222); the rotating residential line works over both HTTP and SOCKS5 with one login.
A static residential IP costs US$0.50 for 1 day and US$7.99 for 30 days; the price is the same in every country. There is no free trial. A proxy IP cannot fix a broken system proxy setting on your PC: reset that first.
Read on 20 November 2026: Windows 10 and 11 path Settings > Network & internet > Proxy, with Automatically detect settings, Use setup script and Manual proxy setup (Use a proxy server, address, port).
Read on 20 November 2026: netsh winhttp show proxy, netsh winhttp reset proxy (sets WinHTTP to DIRECT), import proxy source=ie; WinHTTP is the API used by applications that use WinHTTP.
Read on 20 November 2026: Chrome uses the system proxy settings unless another source such as a policy, a flag or an add-on sets one; Windows supports automatic detection (WPAD); no authentication is supported for SOCKS5 in Chrome.
Proxy302 product facts and price list
Product observation · Confirmed on:
Product facts file of the site (checked against the console, the backend and the price table, October 2026): prices in US$ (1 PTC = US$1), lease terms, protocols and ports, countries, no free trial.
Ready to try it?
Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.