A script can buy, list and hand over a hundred static IPs while you do something else. This guide shows the three calls and where each fingerprint browser needs care.
The purchase call returns one IP for each request, so a bulk order is a loop. The loop must stop at the first failure (for example low balance or no stock), because every call spends wallet balance. The console behaves the same way: with a Quantity of 1 to 100 it buys the IPs one by one and stops at the first failure.
After the purchases, the list call gives every active static IP with its login line. The last step is the fingerprint browser: each one has its own local API and its own limits, summarised in the table below.
| Item | AdsPower | BitBrowser |
|---|---|---|
| Where the address is | http://local.adspower.net:50325/ by default; the port may change, read it in the Local API settings | Not fixed in the documentation: read the local API URL in the system settings after logging in |
| Call that stores proxies | POST /api/v2/proxy-list/create with type, host, port, user, password, remark | No separate list call in what we read; proxies are set on the window with /browser/update or, for existing windows, /browser/proxy/update |
| Attach a proxy to a profile | POST /api/v2/browser-profile/create with user_proxy_config, or proxyid for a saved proxy (or "random") | POST /browser/update with proxyMethod 2, proxyType, host, port, proxyUserName, proxyPassword; an empty id creates a window |
| Limits stated in the documentation | 500 proxies per Add proxy call; 1 request per second for all APIs | All requests are POST with a body; several window fields are required when creating |
Read from each product's own documentation on 15 November 2026; versions change, so check the pages before you rely on a field. Proxy302 has a formal partnership with AdsPower; BitBrowser is listed here only as a second example.
Top up the wallet, then create an API key on the API keys page of the console. The key has an id and a secret; keep both out of scripts you commit, for example in environment variables.
Run the script below with a count of 1, then open My assets (the console page that holds everything you bought) and confirm the IP is there with the protocol you asked for.
Choose a new batch label for each run. If the script stops, run it again with the same label: the keys already used do not buy a second time.
Run the list script. It writes proxies.txt with one host:port:username:password line per active static IP.
Load one line first, open a profile with it and check the exit at https://ipinfo.io/json, then send the rest. Keep one IP for one account.
import os, sys, requests
BASE = "https://proxy302.com/open_api/v3"
AUTH = (os.environ["P302_KEY_ID"], os.environ["P302_KEY_SECRET"]) # API key id and secret
def call(method, path, **kw):
body = requests.request(method, BASE + path, auth=AUTH, timeout=30, **kw).json()
if body.get("code") != 0: # every answer is HTTP 200; code 0 = success
raise SystemExit(f"{path}: code={body.get('code')} msg={body.get('msg')}")
return body["data"]
print(call("GET", "/user/users/wallet")) # balance in PTC
print(call("GET", "/proxy/payway/static_residential")) # plans: pick the payway_id of your term
COUNTRY_ID = 233 # United States; ids come from GET /proxy/area/country?name=...
PAYWAY_ID = int(sys.argv[1]) # plan id printed above
COUNT = int(sys.argv[2]) # keep it small the first time
BATCH = sys.argv[3] # one label per batch, e.g. nov15a
for i in range(COUNT):
data = call("POST", "/proxy/api/proxy/static/ip", json={
"country_id": COUNTRY_ID,
"payway_id": PAYWAY_ID,
"protocol": "http", # fixed per IP at purchase time
"is_data_center": False,
"idempotency_key": f"{BATCH}-{i:04d}", # same key on a retry = no second purchase
})
print(i, data["token_id"], data["host"], data["port"])
Example only. Set P302_KEY_ID and P302_KEY_SECRET first, run with the plan id, a small count and a batch label, for example: python buy.py 12 1 nov15a.
import os, requests
BASE = "https://proxy302.com/open_api/v3"
AUTH = (os.environ["P302_KEY_ID"], os.environ["P302_KEY_SECRET"])
rows, cursor = [], None
while True:
params = {"page_size": 200, "status": 1, "sort_field": "created_on", "sort": "desc"}
if cursor:
params["cursor"] = cursor
body = requests.get(BASE + "/proxy/tokens/static/ip", params=params, auth=AUTH, timeout=30).json()
if body["code"] != 0:
raise SystemExit(body["msg"])
rows += body["data"]["data"]
cursor = body["data"].get("next_cursor")
if not body["data"].get("has_more") or not cursor:
break
with open("proxies.txt", "w", encoding="utf-8") as f:
for r in rows:
f.write(r["ads_proxy_url"] + "\n") # host:port:username:password
print(len(rows), "active static IPs written to proxies.txt")
Example only. ads_proxy_url and the paging fields are described in the developer API reference.
import requests
ADS = "http://local.adspower.net:50325" # the port can change: see Local API in the AdsPower settings
items = []
for line in open("proxies.txt", encoding="utf-8"):
host, port, user, pwd = line.strip().split(":", 3)
items.append({
"type": "http" if port == "2222" else "socks5", # Proxy302: HTTP on 2222, SOCKS5 on 3333
"host": host, "port": int(port), "user": user, "password": pwd,
"remark": "proxy302",
})
# AdsPower: at most 500 proxies per call and 1 request per second.
# Check the body shape against the Add proxy page and try with one line first.
print(requests.post(ADS + "/api/v2/proxy-list/create", json=items[:1], timeout=30).json())
Illustrative. The AdsPower page lists the fields but shows no body example, so test with one line and read the answer before sending 500.
Check Read msg: it says whether the balance is too low, the country has no stock, or the key is not yet linked to a Proxy302 account.
Fix Top up or choose another country or term, then run again with the same batch label. Stock changes daily and is shown on the order page.
Stop when If it repeats with a funded wallet and stock, send the msg and your order number to support.
Check The key id or secret is wrong, or the account password was used instead of an API key.
Fix Create a key on the API keys page and use its id and secret as the Basic login.
Stop when Do not retry in a loop: a wrong key never starts working.
Check The retry used a new idempotency_key. The same key replays the earlier order; a new key is a new purchase.
Fix Build the key from the batch label and the counter, as in the script, and never from the clock.
Stop when Count the rows in My assets before the next run.
Check Check that the Local API is on, the port matches the settings, you stay under 1 request per second and the body follows the Add proxy page.
Fix Send one proxy by itself and read the msg; then send in groups of up to 500 with a pause between calls.
Stop when If one line fails alone, check its host, port and login against My assets.
A static ISP IP costs US$0.50 for one day and US$7.99 for 30 days, about US$0.27 per day, and the price is the same in every country. A datacenter IP costs US$0.25 for one day and US$3.99 for 30 days. Each IP is issued with one protocol, HTTP on port 2222 or SOCKS5 on port 3333 of proxy.proxy302.com. The console takes a Quantity of 1 to 100 per order. Auto-renew is optional and set per IP; a purchase made in the console has it on by default, so check the setting on the IPs a script bought and switch it off in My assets if you do not want it. There is no free trial, and the smallest purchase is one IP for one day.
Yes. The static IP endpoint of the open API buys one IP per call from the wallet, with a country, a plan id and a protocol. The full list of endpoints is in the developer docs.
One. The count and format parameters belong to the dynamic endpoints. For static IPs, loop over the call, or use the console order form with a Quantity of 1 to 100.
The login line as host:port:username:password, which is the order most fingerprint browsers accept for pasted proxies. Check the order in your browser before a large paste.
The API key is made on the API keys page and is separate from the account password. Use it as the HTTP Basic login on every call.
The purchase and list steps are the same. Only the last step changes, because BitBrowser sets proxies on windows through its own /browser/update call with the fields in the table above.
Add Proxy lines, a Bulk Create template or Update profile: three AdsPower batch routes, with Proxy302 lines whose protocol you set from the port.
Batch Add Proxy into a pool plus Bind Window, an Excel import of windows, or Batch Update: three BitBrowser routes, with Proxy302 lines typed from the port.
What a proxy MCP server is, how local and remote MCP servers differ, how to install one in Claude Code, Codex CLI and Cursor, and how to route the server's own traffic through a proxy.
Register, top up from US$5, buy one static IP from US$0.50 a day, paste it into your software and test it.
Fixed static ISP proxies: a residential-grade IP that stays the same for the whole term. For social accounts, stores and AI tools. HTTP and SOCKS5.
View options and pricingProduct observation · Confirmed on:
Product facts file of the site (values checked against the console, the backend and the price table on 18-19 October 2026): prices in US$ (1 PTC = US$1), lease terms, protocols and ports, quantity limits, no free trial.
Official documentation · Confirmed on:
Read on 15 November 2026: authentication is HTTP Basic with the API key id and secret; every answer is HTTP 200 with code, msg and data and success is code 0; the static IP purchase endpoint takes country_id, payway_id, protocol and an idempotency_key of 8-128 characters; the asset list returns ads_proxy_url as host:port:username:password; error code 50301 covers low balance and no stock.
Official documentation · Confirmed on:
Read on 15 November 2026: POST /api/v2/proxy-list/create with type, host, port, optional user, password, remark; "A maximum of 500 proxies can be added at a time"; success answers code 0 and a list of proxy ids. The page shows no request-body example.
Official documentation · Confirmed on:
Read on 15 November 2026: POST /api/v2/browser-profile/create needs group_id and fingerprint_config, and either user_proxy_config or proxyid (a saved proxy id, or "random").
Official documentation · Confirmed on:
Read on 15 November 2026: default address http://local.adspower.net:50325/ or http://localhost:50325/ and the port "might change"; access frequency limit of 1 request per second for all APIs; turn the Local API on under Account Management, Setting, Local API.
Official documentation · Confirmed on:
Read on 15 November 2026: POST /browser/update creates a window when id is empty and edits it when id is given; proxy fields proxyMethod (2 = custom), proxyType (noproxy, http, https, socks5), host, port, proxyUserName, proxyPassword; /browser/proxy/update changes proxies in batch.
Official documentation · Confirmed on:
Read on 15 November 2026: install and log in to the browser, then read the local API URL in the system settings; every request is a POST with the parameters in the body.
Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.
