Skip to content

Updated

HTTP vs HTTPS Proxy:
What to Choose and What to Enter

  1. For almost every tool, choose the HTTP proxy type, even if you only visit https:// sites: the proxy opens a tunnel with the CONNECT method and the HTTPS traffic inside stays encrypted.
  2. An https:// proxy address means something rarer: the connection to the proxy itself is wrapped in TLS, and only some tools support it.
  3. On Proxy302 the choices are HTTP on port 2222 and SOCKS5 on port 3333; there is no separate HTTPS type. If your tool offers only HTTPS, try HTTP first, and SOCKS5 if the tool has no HTTP option.

Check it right after buyingExample output

curl -x http://USER:PASS@HOST:PORT https://ipinfo.io/json

ip
203.0.113.24
country
US
Matches the country you picked
Day 15
203.0.113.24
Same address for the whole term
Example addresses (203.0.113.0/24), not real exits
01 / 08Three things "HTTPS proxy" can mean

Short answer first, then the three things people mean by HTTPS proxy and the exact type and port to type in your tool.

Three things "HTTPS proxy" can mean

Three things "HTTPS proxy" can mean
ItemWhat it meansWhat to enter
An HTTP proxy used for https:// sitesThe common meaning. The tool sends CONNECT and the proxy tunnels the encrypted trafficType HTTP, port 2222
A proxy reached over TLSThe tool wraps the connection to the proxy in TLS. Only some tools support itNot offered by Proxy302; use HTTP or SOCKS5
A label on a tool or a shop pageOften just "works with HTTPS sites"Check the protocol and port, not the word

Our summary of the MDN and curl documentation read on 20 November 2026; protocols and ports from the Proxy302 product facts.

How an HTTP proxy carries an HTTPS site

For an https:// address the tool first sends the proxy a CONNECT request with the host and port, plus your proxy login. When the proxy answers with a 2xx status it switches to tunnel mode and forwards the bytes both ways. The TLS session is then built between you and the site, inside the tunnel.

So the proxy can see which host and port you asked for and how much data passes, but not the page content of an HTTPS site. For a plain http:// site it sees the whole request, as it would without a proxy.

What to enter in your tool

  1. Step 1

    Open My assets and note the protocol of your IP: HTTP (port 2222) or SOCKS5 (port 3333), plus host, login and password.

  2. Step 2

    In the tool pick the type that matches: "HTTP" for an HTTP IP, "SOCKS5" for a SOCKS5 IP. If the tool has an "HTTPS" entry only, try it with port 2222 once; if it fails at once, the entry probably expects TLS to the proxy, so use another tool setting or SOCKS5.

  3. Step 3

    Fill host, port, login and password. If the tool wants one string, write it as http://LOGIN:PASSWORD@HOST:2222 (no https:// in front for an HTTP proxy).

  4. Step 4

    Test with the curl lines below or the tool's own check.

    Expected result The address and country of the static IP.

The same proxy as HTTP and as SOCKS5

# HTTP proxy (port 2222): works for http:// and https:// sites
curl -x http://LOGIN:PASSWORD@HOST:2222 https://ipinfo.io/json

# SOCKS5 proxy (port 3333), the name is resolved at the proxy
curl -x socks5h://LOGIN:PASSWORD@HOST:3333 https://ipinfo.io/json

Example. Replace LOGIN, PASSWORD and HOST with the values in My assets. Use the line that matches the protocol of your IP; a per-IP lease also answers on the other protocol on its own port, but the protocol shown in My assets is the one to start with.

If it fails after you choose a type

Fails at once with an "HTTPS" type

Check Whether the tool is trying TLS to the proxy while the port speaks plain HTTP.

Fix Switch the type to HTTP on port 2222, or to SOCKS5 on port 3333.

The type is right but the port is not

Check HTTP goes with 2222 and SOCKS5 with 3333; a mismatch looks like a reset or a timeout.

Fix Set the port that goes with the type.

407 or authentication required

Check Login and password against My assets, and whether the tool sends them to the proxy.

Fix Correct them; if the tool has no login fields, use a local forwarder.

Prices and limits

A static ISP IP costs US$0.50 for 1 day and US$7.99 for 30 days, the same in every country, and an order takes 1 to 100 IPs. HTTP uses port 2222 and SOCKS5 port 3333, and the IP does not rotate during the lease. There is no free trial.

HTTP vs HTTPS proxy: FAQ

Is an HTTP proxy safe for HTTPS sites?

The page content stays encrypted between you and the site, because the proxy only tunnels it. The proxy still sees the host, port and amount of data, and your proxy login crosses the first hop as it is.

Should I type https:// in front of my proxy address?

No, not for an HTTP proxy. Use http:// or just host and port. The https:// form means TLS to the proxy itself.

Does Proxy302 have an HTTPS proxy?

The types are HTTP on port 2222 and SOCKS5 on port 3333. HTTP carries https:// sites through CONNECT.

HTTP or SOCKS5, which should I pick?

Pick what your tool supports and what your IP was issued with. Browsers and many apps take HTTP most easily; some tools only offer SOCKS5.

How much is a static IP?

US$0.50 for 1 day and US$7.99 for 30 days, the same in every country.

Further reading

Setup guides Proxy302 publishes on GitHub on the same topic:

Reference links

4
  1. MDN: CONNECT request method

    Official documentation · Confirmed on:

    Read on 20 November 2026: CONNECT asks a proxy to establish an HTTP tunnel to a destination and then forward data both ways; a 2xx response switches the proxy to tunnel mode; the request target is host and port; the example carries a Proxy-Authorization header.

  2. curl manual: --proxy

    Official documentation · Confirmed on:

    Read on 20 November 2026: without a protocol or with http:// the proxy is treated as an HTTP proxy; socks5:// and socks5h:// request SOCKS5; HTTPS proxy support works with the https:// prefix for several TLS backends; --proxytunnel makes curl use CONNECT through an HTTP proxy.

  3. Microsoft Learn: HttpClient proxy settings

    Official documentation · Confirmed on:

    Read on 20 November 2026: for the HTTP_PROXY and HTTPS_PROXY variables the proxy URL must start with http, not https; HTTPS_PROXY names the proxy used for HTTPS requests, not an HTTPS-type proxy.

  4. Proxy302 product facts and price list

    Product observation · Confirmed on:

    Product facts file of the site, checked 20 November 2026 against the console and the price table: per-IP lease prices in US$ (1 PTC = US$1) for 1 to 90 days, HTTP port 2222 and SOCKS5 port 3333, quantity limit, no free trial, optional auto-renew.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.