Skip to content

Facebook Proxy Free Trial? A 30-Minute Test Plan

What to check in the first 30 minutes of a Facebook proxy, and what a short test cannot tell you.

What a trial can and cannot tell you

A short test answers technical questions: is the exit in the country you ordered, is it a residential (isp) or hosting address, is it fast enough, and does Facebook load through it. These have clear pass or fail results.

It cannot predict how Facebook will treat an account over weeks. That depends on the account itself and Facebook's own decisions, not on a 30-minute check. If you have no free trial, a 1-day lease is simply a cheap way to rule out a bad exit before you commit to a longer term.

The 30-minute test plan

The 30-minute test plan
ItemHowPass looks like
Minutes 0–5: exit countryRun the curl command and read country, region, cityCountry matches the order; city is plausible
Minutes 5–10: IP typeRead the org/ASN and the type in an IP type checkerA residential (isp) type, not hosting, for a static ISP order
Minutes 10–15: speedRun the timing command three timesConnect and total time are steady, with no timeouts
Minutes 15–20: Facebook loadsOpen facebook.com in a clean browser profile through the proxy; do not log in yetThe login page loads fully, with images and no error page
Minutes 20–25: no leakRun a WebRTC leak test in the same browserNo address other than the proxy exit is shown
Minutes 25–30, then hours later: stabilityRun the curl command again after an hour and the next dayThe IP is unchanged during the lease

Our own checklist, written 16 November 2026. The IP type column follows IPinfo's isp and hosting labels; other checkers can disagree, so use more than one.

Run the test

  1. Step 1: get the proxy details

    Open My assets, copy the host, port, login and password of the IP, and note whether it was issued as HTTP or SOCKS5.

  2. Step 2: check exit and speed

    Run the commands in the code block below. Read country and org, then the connect and total time.

    Expected result JSON with the ordered country and a network name; times of about a second or less are normal for a single request, but compare your own runs.

  3. Step 3: check IP type

    Read the IP in the type and fraud score guides below and note what each checker says. Do not treat one score as a verdict.

  4. Step 4: open Facebook without logging in

    Put the proxy in a browser profile used only for this test, open facebook.com and look at the login page. Then run the WebRTC test in the same profile.

  5. Step 5: log in only with the account that will live on this IP

    Facebook's terms allow one personal account per person and no password sharing, so do not create test accounts. When you do log in, your own account's Where you are logged in list shows date, time, location and device for each login, which is a quick way to see what Facebook recorded.

    Before continuing If Facebook asks you to verify, complete the verification honestly. A short test is not a reason to repeat logins.

  6. Step 6: check again later

    Run the curl command after an hour and again the next day. A static IP should show the same address throughout the lease.

Commands: exit and timing

# Replace LOGIN, PASSWORD, HOST and PORT with the values from My assets (HTTP proxy)
curl -x "http://LOGIN:PASSWORD@HOST:PORT" -s https://ipinfo.io/json

# Same request, printing connect time and total time
curl -x "http://LOGIN:PASSWORD@HOST:PORT" -s -o /dev/null \
  -w "connect %{time_connect}s total %{time_total}s\n" https://ipinfo.io/json

Example with curl for an HTTP proxy; fill in the values from your console. For an IP issued as SOCKS5, use the socks5h:// scheme and port 3333.

If a check fails

facebook.com does not load or shows an error page

Check Run the curl command first. If it fails, the problem is the proxy settings (address, port, HTTP vs SOCKS5, login and password). If curl works, check the browser profile and the system clock and time zone.

Fix Fix the setting that failed. If the IP itself looks dead, open a Support ticket with the order number and it is reissued.

Stop when Stop retrying after two clean attempts with correct settings and open a ticket instead.

The country in the curl output is not the one you ordered

Check Make sure the browser or system is not using another proxy and that you copied the right IP from My assets.

Fix Fix the settings and run curl again; if it is still wrong, send the output and order number in a ticket.

The type shows hosting for a static ISP order

Check Compare two or three type checkers. IPinfo itself says its types are inferred from IP behaviour and network records, so a single label can differ from another service.

Fix If most checkers agree it is hosting, open a ticket with the order number and the results.

The address changed during the lease

Check Confirm you are not comparing against a rotating residential credential or another proxy in the same browser.

Fix If a static IP really changed, open a ticket with both addresses and the times.

Buy the test with Proxy302

  1. Step 1: choose country, term and quantity

    Open the static residential pay-per-IP page, choose the country the account belongs to, the 1-day term and quantity 1. A 1-day lease is US$0.50; a 30-day lease is US$7.99 (about US$0.27 a day), the same price in every country. Availability by country is shown on the order page.

  2. Step 2: Auto-renew is optional; untick it for a test

    Auto-renew is optional and on by default for a new purchase; untick it on the purchase page, or switch it off later in My assets > Details.

  3. Step 3: keep the same IP if it passes

    Renew the same IP for a longer term from My assets and keep one account on it. If it does not work, open a Support ticket with the order number and it is reissued.

Facebook proxy trial: FAQ

Is there a free trial for a Facebook proxy at Proxy302?

No. The smallest purchases are one static IP for 1 day at US$0.50 or 1 GB of rotating residential traffic at US$1.50 on the Budget line.

Can I test a proxy with my real Facebook account?

Test the exit first without logging in. Log in only with the account that will keep using this IP, because Facebook's terms allow one personal account per person and no password sharing.

Should I use a static or a rotating IP for Facebook?

For an account you keep logging in to, a static IP that does not change during the lease. Rotating residential suits jobs with no account to protect.

How long should a test run?

Thirty minutes covers the six checks. Check the address again after an hour and the next day to confirm it stays the same.

Will the test renew by itself?

Only if Auto-renew is on. It is optional and on by default for a new purchase, so untick it if it is only a test.

Reference links

4
  1. Proxy302 product facts and price list

    Product observation · Confirmed on:

    Product facts file of the site, read 16 November 2026: no free trial; static ISP lease US$0.50 for 1 day and US$7.99 for 30 days, the same price in every country; availability by country is shown on the order page and changes daily; HTTP or SOCKS5 chosen per IP; auto-renew is optional.

  2. Meta: Terms of Service, section 3.1

    Official documentation · Confirmed on:

    Read on 16 November 2026: section 3.1 asks people to use the name they use in everyday life, give accurate information, create only one account (their own) for personal use, and not share their password or give others access to the account.

  3. Facebook Help: where you are logged in

    Official documentation · Confirmed on:

    Read on 16 November 2026: the Where you are logged in section lists current logins, and each entry includes a date, time, location and device type.

  4. IPinfo community: how connection types are decided

    Official documentation · Confirmed on:

    Read on 16 November 2026: IPinfo labels connections as isp or hosting (among other types) from IP behaviour and public network records, aggregated into IP range types and then company or ASN types.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.