Skip to content

Updated

Octoparse, ParseHub and WebHarvy Proxy Settings

  1. WebHarvy: Settings > Proxy Settings tab, with address, port and login, for HTTP and SOCKS proxies.
  2. ParseHub: Custom Proxies in the project settings, which ParseHub support must switch on and which needs a username and password.
  3. Octoparse: Task Settings > Anti-blocking > Use my own proxies, but only as IP:port over HTTP and only for local runs, so a proxy that needs a login does not fit there.

Check it right after buyingExample output

curl -x http://USER:PASS@HOST:PORT https://ipinfo.io/json

ip
203.0.113.24
country
US
Matches the country you picked
Day 15
203.0.113.24
Same address for the whole term
Example addresses (203.0.113.0/24), not real exits
01 / 10Octoparse: own proxies are IP:port only

Three scraping tools, three different places for a proxy, and one catch: Octoparse takes no login for its own-proxy list.

Octoparse: own proxies are IP:port only

Octoparse's help center says Use my own proxies takes an HTTP proxy written as IP:port. Username and password authentication is not supported, and own proxies work for local runs only: choosing one in the editor does not make it available to cloud runs.

Octoparse sells its own proxies instead. They are enabled under Task Settings > Anti-blocking > Access website via proxies > Use Octoparse proxies, billed from account credits by page-loading traffic, and work in the editor, local runs and cloud runs. Because a login-based proxy cannot be entered, a Proxy302 proxy does not fit Octoparse's own-proxy list.

Octoparse: where the setting is

  1. Step 1

    Open the task and go to Task Settings > Anti-blocking.

  2. Step 2

    Turn on Access website via proxies.

  3. Step 3

    Choose Use my own proxies (IP:port, HTTP, no login) or Use Octoparse proxies.

  4. Step 4

    Set the rotation interval if you want one, test the task, and enable Use the same proxies for task runs only after the test data looks right.

ParseHub: Custom Proxies on request

ParseHub's help article describes custom proxies as an add-on to IP Rotation, for targeting a country or using your own proxies, and says they need a username and password. They have to be enabled on your account through ParseHub support first.

After that, open the project settings, tick Rotate IP Addresses and a Custom Proxies box appears for your list. Enter the proxies in the format that box and the help article show. For the exact format, follow the current wording of the article.

WebHarvy: Proxy Settings tab

  1. Step 1

    Click Settings in the Home menu and open the Proxy Settings tab.

  2. Step 2

    In the Add proxy box enter the address, the port and the login, then click +.

  3. Step 3

    Or use Import with a text or CSV file, one proxy-address:port:username:password per line.

  4. Step 4

    Tick Rotate proxies to cycle through a list; otherwise WebHarvy uses the first proxy in the list. WebHarvy also suggests Disable cookies while mining in Browser settings when you use proxies.

Where each tool takes a proxy

Where each tool takes a proxy
ItemWhere to enter itLogin supportedFits a Proxy302 proxy
OctoparseTask Settings > Anti-blocking > Use my own proxiesNo: IP:port, HTTP only, local runs onlyNo, a Proxy302 proxy needs a login
ParseHubProject settings > Rotate IP Addresses > Custom ProxiesYes: username and password, enabled by ParseHub supportYes, once ParseHub support has enabled custom proxies
WebHarvyHome > Settings > Proxy SettingsYes: address, port and login; HTTP, HTTPS, SOCKS4, SOCKS4a, SOCKS5Yes: HTTP on port 2222 or SOCKS5 on port 3333

From the Octoparse and WebHarvy help pages (read 20 November 2026) and the ParseHub help article (read 20 November 2026). Menus change; check the current help pages.

How to do it with Proxy302

For tools that accept a login, Proxy302 rotating residential traffic is billed per GB (Budget line US$1.50 per GB, Premium line US$5 per GB). One entry is enough: HTTP is on port 2222 and SOCKS5 on port 3333 of proxy.proxy302.com, and a new IP is given to each new connection. Rotate proxies in WebHarvy only matters when you enter several separate proxies.

When the target needs one fixed address, a datacenter IP costs US$0.25 for 1 day or US$3.99 for 30 days, with HTTP or SOCKS5 chosen at purchase. There is no free trial; the smallest purchase is 1 GB or one IP for one day.

How to do it with Proxy302: steps

  1. Step 1

    Open the rotating residential page, choose the line, then click Review cost and generate.

  2. Step 2

    Open My assets and copy HOST, PORT, USERNAME and PASSWORD.

  3. Step 3

    Enter them in WebHarvy's Add proxy box (or in ParseHub's Custom Proxies box after ParseHub support enables it), using port 2222 with an HTTP type or 3333 with SOCKS5.

  4. Step 4

    Run a small test project that opens https://ipinfo.io/json and check that the country and org fields describe the proxy.

Troubleshooting

Octoparse does not accept my proxy

Check The proxy needs a username and password, which Octoparse's own-proxy list does not support, or the run is a cloud run.

Fix Use Octoparse proxies, or run the job in a tool that accepts a login, such as WebHarvy.

Stop when Do not expect a login to work by writing it into the IP:port field.

ParseHub has no Custom Proxies box

Check Custom proxies are not enabled on the account, or Rotate IP Addresses is not ticked.

Fix Ask ParseHub support to enable custom proxies, then tick Rotate IP Addresses in the project settings.

Stop when If support cannot enable it on your plan, use another tool for this job.

WebHarvy shows connection errors or my own IP

Check The proxy type does not match the port (HTTP 2222, SOCKS5 3333), or the proxy was added but not used by the project.

Fix Match type and port, then run a test project against https://ipinfo.io/json.

Stop when If every port times out from your network, test from another network before changing settings.

FAQ

Where do I enter a proxy in Octoparse?

Under Task Settings > Anti-blocking, turn on Access website via proxies and choose Use my own proxies or Use Octoparse proxies. Own proxies take IP:port over HTTP, without a login, and run locally only.

Does ParseHub support custom proxies?

Yes, as an add-on to IP Rotation that ParseHub support must enable on your account. It needs a username and password.

Does WebHarvy support proxies with a username and password?

Yes. The Proxy Settings tab takes address, port and authentication, and WebHarvy supports HTTP, HTTPS, SOCKS4, SOCKS4a and SOCKS5.

Do I need Rotate proxies with a rotating gateway?

No. One gateway entry already gives a new IP on each new connection; Rotate proxies helps when you enter a list of separate proxies.

Further reading

Setup guides Proxy302 publishes on GitHub on the same topic:

Reference links

4
  1. Octoparse Help Center: Proxy

    Official documentation · Confirmed on:

    Read on 20 November 2026: Use my own proxies takes IP:port, HTTP only, with no username and password support, and works for local runs only; Octoparse proxies are set under Task Settings > Anti-blocking > Access website via proxies > Use Octoparse proxies, billed from credits; Use the same proxies for task runs; the rotation interval.

  2. WebHarvy: Scraping via Proxy Servers

    Official documentation · Confirmed on:

    Read on 20 November 2026: Settings in the Home menu > Proxy Settings tab; HTTP, HTTPS, SOCKS4, SOCKS4a and SOCKS5; Add proxy box with address, port and authentication, then +; Import of address:port:username:password lines; Rotate proxies; Disable cookies while mining.

  3. ParseHub Help: Adding Custom Proxies to ParseHub for all Paid Plans

    Official documentation · Confirmed on:

    Read in full in a browser on 20 November 2026: custom proxies are an add-on to IP Rotation, need a username and password, must be enabled on the account through ParseHub support, and are entered in a Custom Proxies box that appears after ticking Rotate IP Addresses in the project settings, one proxy per line in the format IPAddress:Port:Username:Password.

  4. Proxy302 product facts and price list

    Product observation · Confirmed on:

    Product facts file of the site (values checked against the console, the backend and the price table): products, prices in US$ (1 PTC = US$1), lease terms, protocols and ports, quantity limits, no free trial.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.