Skip to content

Updated

Which IP for warming up and multi-account work:
per GB or per IP (with worked examples)

  1. For warming up and multi-account work, give each account one static residential exit.
  2. When you have many accounts and each uses little traffic per month (tens to hundreds of MB), the per-GB static residential ISP costs least: US$3.50 per GB, up to 500 exits per order, generating is free.
  3. For example, 300 accounts at 50 MB each per month cost about US$52.50 a month per GB, against US$2,397 a month on per-IP leases. The break-even is about 2.28 GB per exit per month. If you use more, or an account must keep one IP through the whole lease (shop accounts, AI accounts, long-term main accounts), lease per IP (US$7.99 for 30 days, the IP stays the same during the term).

Check it right after buyingExample output

curl -x http://USER:PASS@HOST:PORT https://ipinfo.io/json

ip
203.0.113.24
country
US
Matches the country you picked
Day 15
203.0.113.24
Same address for the whole term
Example addresses (203.0.113.0/24), not real exits
01 / 08Why per GB costs less when you have many accounts

First estimate how much traffic each account uses in a month, then choose per GB or per IP.

Why per GB costs less when you have many accounts

A per-IP lease is one price per IP per month, whether the account logs in a few times or watches video every day. Per GB, generating exits is free and the wallet is charged for the traffic actually used, US$3.50 per GB.

The typical use of warm-up and matrix accounts is to sign in once a day, post a few times and reply a few times, with little video or live streaming. Across all per-GB static exits in the last 30 days, the median traffic per exit is about 46 MB a month, and 90% stay under 270 MB. At that level, one exit costs a few cents a month per GB, against US$7.99 per IP.

So ask yourself two questions first: roughly how much traffic does each account use in a month? Does this account have to keep the same IP for the whole term?

Worked examples: what a month costs for different account counts and usage

Worked examples: what a month costs for different account counts and usage
ItemTraffic per account per monthPer GB (US$3.50/GB)Per-IP lease (US$7.99 per IP)
10 accounts50 MBabout 0.5 GB ≈ US$1.75US$79.90
100 accounts50 MBabout 5 GB ≈ US$17.50US$799
300 accounts50 MBabout 15 GB ≈ US$52.50US$2,397
100 accounts300 MBabout 30 GB ≈ US$105US$799
500 accounts100 MBabout 50 GB ≈ US$175US$3,995
20 accounts3 GBabout 60 GB ≈ US$210US$159.80 (per IP is cheaper)

Rough maths with 1 GB ≈ 1,000 MB; the actual charge follows the traffic recorded in the console. Over 30 days: if an exit uses less than about 2.28 GB a month (US$7.99 ÷ US$3.50), per GB costs less; with more, or when an account needs the same IP for the whole term, the per-IP lease fits better. Prices from the product fact sheet of 22 November 2026.

Per GB or per IP: what to compare

Per GB or per IP: what to compare
ItemPer GBPer-IP lease
How it is chargedUS$3.50 per GB, you pay for what you use, generating is freeUS$7.99 per IP for 30 days (US$0.50 for 1 day)
Does the IP changeNormally fixed; if a line has a problem it is replaced with another IP in the same country, username and password stay the sameFixed for the term; renewal usually keeps it
Only for youNot reserved for one customer long termDedicated on terms of 30 days or more
Per orderUp to 500 exitsUp to 100 IPs
Best forWarm-up, matrix and test accounts: many accounts, little traffic eachShop accounts, ad accounts, AI accounts, long-term main accounts: the same IP all the time

Per-IP lease: US$7.99 for 30 days, US$0.50 for 1 day; per GB: US$3.50. Prices from the product fact sheet of 22 November 2026.

The usual approach: use both

Split your accounts into two groups: the few main accounts that need the same IP long term (shops, payments, ad accounts, subscription accounts such as Claude or ChatGPT) go on a per-IP lease; the many warm-up and matrix accounts with little traffic each go per GB. Main accounts stay stable and small accounts stay cheap.

Do not switch one account back and forth between the two kinds of exit. An account you put on per GB keeps using its own exit; if that exit gets another IP, the account simply uses the new one.

Which countries you can choose

There are 27 countries today. Brazil, Vietnam and Indonesia are mainly home broadband; the United States, France, Japan, South Korea and the Netherlands are carrier ISP lines; the United Kingdom and Germany are a mix of ISP and home broadband. In some countries data-center IPs make up a large share; the order page's country list marks them, and the labels and stock shown there at the time of ordering apply.

You choose the country only, not the state or city. For a city, use the per-IP static residential ISP or the Premium line of dynamic residential.

Generate per-GB exits in 4 steps

  1. Step 1: Top up

    Add funds to your wallet; 0.01 PTC or more is enough to generate (1 PTC = US$1).

    Expected result The wallet shows your balance.

  2. Step 2: Switch to per GB

    Open the static residential ISP order page and set Billing to Per GB (PTC/GB).

  3. Step 3: Choose country and quantity

    Pick a country, choose HTTP or SOCKS5 to match your software, enter your number of accounts (1 to 500) and confirm; generating is free. Exits are created one by one and generation stops at the first failure; the ones already created work as usual.

    Expected result This batch of exits appears in My proxies.

  4. Step 4: One exit per account

    In My proxies, copy the details or use Bulk export (one host:port:username:password line each), and give one exit to one profile and one account. To see how much traffic was used, open Traffic usage in the console and look at the Static per-GB column, counted per day.

FAQ

Is a per-GB exit a fixed IP?

Normally it is a fixed ISP exit. If a line has a problem or is adjusted, the system moves you to another IP in the same country and your credentials stay the same. If you need the same IP for a whole term, lease it per IP.

Roughly how much traffic does one account use in a month?

It depends on use. Signing in, posting and replying is usually tens of MB; frequent video or live streaming reaches hundreds of MB or several GB. For the per-GB exits we counted, the median is about 46 MB per exit per month. Generate a small batch first, run it for a week, and check real usage in Traffic usage before scaling up.

Can one exit serve several accounts?

Technically yes, but warm-up usually means one exit per account, with no sharing between accounts. A large number of exits is not expensive: per GB you pay for total traffic, not for the number of exits.

Does a per-GB IP mean my accounts will have no problems?

No, you cannot say that. Whether an account is restricted is decided by the platform and depends on content, habits and devices. What an IP can do is let an account go online from the same country and the same residential exit all the time, rather than the US today and Japan tomorrow.

Further reading

Setup guides Proxy302 publishes on GitHub on the same topic:

Reference links

3
  1. Proxy302 product fact sheet and the per-GB order page

    Product observation · Confirmed on:

    Site product fact sheet: per-GB static residential ISP at US$3.50 per GB (charged to the wallet, generating is free, the wallet needs at least 0.01 PTC), up to 500 exits per order, exits are not reserved for one customer long term, 27 countries and each country's IP type (set by the stock check of 2026-11-20); per-IP lease US$7.99 for 30 days.

  2. Proxy302 per-GB static usage statistics (last 30 days, aggregate)

    Product observation · Confirmed on:

    Read-only count by the analytics team of all per-GB static exits from 2026-10-21 to 11-20: median traffic per exit over 30 days about 46 MB, P90 about 270 MB, 73% under 100 MB. Only aggregate numbers are used, no customer information.

  3. Proxy302 console: My proxies, Bulk export

    Product observation · Confirmed on:

    Console code assetExport.ts: any proxy with an address and credentials can be exported; the text format is one host:port:username:password line per proxy, CSV is also available, up to 2,000 lines per export.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.