Skip to content

Updated

What Is a Backconnect Proxy? How a Rotating Gateway Works

  1. A backconnect proxy is a gateway: you configure one fixed host and port, and the provider decides which exit IP carries each connection.
  2. Unlike a list of IPs, nothing on your side changes when the exit changes.
  3. "Backconnect" is trade jargon, not a standard, and it does not mean the connection is reversed: your tool connects to the gateway like to any proxy, then the gateway relays onward. On Proxy302 rotating residential, the gateway is proxy.proxy302.com (HTTP on port 2222, SOCKS5 on port 3333), and by default every new connection gets a new IP.

Check it right after buyingExample output

curl -x http://USER:PASS@HOST:PORT https://ipinfo.io/json

ip
203.0.113.24
country
US
Matches the country you picked
Again
203.0.113.141 → 203.0.113.67 → 203.0.113.209
A rotating proxy gives a new exit each time
Example addresses (203.0.113.0/24), not real exits
01 / 07What the gateway does

One address to connect to, many exit IPs behind it: how it works and how to see it for yourself.

What the gateway does

With a plain proxy you give your tool the address of one machine, and traffic leaves from that machine's IP. With a gateway you also give one address, but the machine behind it hands each connection to an exit IP chosen from a larger set. Your tool speaks ordinary proxy protocols to the gateway: HTTP CONNECT or SOCKS5, with a username and password.

Both protocols are public standards. HTTP CONNECT turns the connection into a tunnel, a blind relay between two connections (RFC 9110). SOCKS5 has the client send a command, a destination and a port after agreeing an authentication method (RFC 1928). Nothing in them says how the exit is picked, which is why the exit rules are the provider's own and worth reading.

Gateway or a fixed IP: how they differ

Gateway or a fixed IP: how they differ
ItemBackconnect gateway (rotating residential)Fixed IP (static ISP or datacenter)
What you configureOne host and port; the exit changes behind itOne IP and port per address you rent
When the IP changesDefault: on every new connection, not every request; open connections keep their IP; a session option holds one IPDoes not change during the lease
How you payPer GB of traffic: US$1.50 (Budget line) or US$5 (Premium line)Per IP per term: for static ISP US$0.50 for 1 day to US$23.97 for 90 days
What it fitsScraping, price and ad checks from many places, jobs that need many different addressesAccounts and tools that expect the same address every time
What it does not fitLogging in to an account and expecting the address to stay putJobs that need a new address every few requests without managing a list

Prices and ports are from the Proxy302 product facts file (20 November 2026). Connection-level rotation follows the line tests described in the linked test page.

See the rotation yourself

# Each curl call opens a new connection, so each should print a different exit IP
PROXY="http://LOGIN:PASSWORD@proxy.proxy302.com:2222"
for i in 1 2 3 4 5; do
  curl -s --max-time 20 -x "$PROXY" https://ipinfo.io/ip; echo
done

# One curl call with several URLs reuses the connection, so the IP usually stays the same
curl -s --max-time 30 -x "$PROXY" https://ipinfo.io/ip https://ipinfo.io/ip

Example only: LOGIN and PASSWORD are your own proxy credentials; for SOCKS5 use socks5h://LOGIN:PASSWORD@proxy.proxy302.com:3333. With a session option or a sticky exit mode the IP is held instead.

Use a rotating gateway on Proxy302

  1. Step 1: Buy a small amount of traffic

    Rotating residential is billed per GB and the smallest purchase is 1 GB. There is no free trial, so a small first purchase is the test.

  2. Step 2: Generate a connection and pick the exit mode

    Choose the country and, if needed, the exit mode: a new IP per connection, or a sticky IP that stays across requests. Existing proxies do not change when you switch the mode, so generate a new one.

  3. Step 3: Put the gateway into your tool

    Host proxy.proxy302.com, port 2222 for HTTP or 3333 for SOCKS5, with your username and password. One username and password works over both protocols.

  4. Step 4: Run the check above

    Five separate calls should show different IPs by default. If they do not, you are on a sticky mode or your tool is reusing one connection.

What to keep in mind

"New IP per connection" is not "new IP per request". Browsers and HTTP libraries reuse connections, so many requests can leave from one IP. If you need a fresh IP for each request, open a new connection each time or ask your tool to disable keep-alive.

A gateway is the wrong tool when an account expects the same address every time; use a static IP for that. Proxy302 rotating residential puts no cap on concurrent connections, so the practical limits are the target site's own limits and your machine.

Backconnect proxies: common questions

Is a backconnect proxy the same as a rotating proxy?

Not exactly. Backconnect describes the shape (one gateway in front), rotating describes the behaviour (the exit changes). Most rotating residential products use a gateway, and a gateway can also be set to hold one IP for a session.

Does a backconnect proxy mean the connection is reversed?

No. Your tool connects to the gateway as to any proxy. The name is trade jargon.

Why did my IP not change between requests?

The new IP comes per connection, and your tool probably reused one connection, or the proxy is in a sticky mode. Open a new connection per request or generate a proxy with "new IP per connection".

Is a gateway good for logging in to accounts?

Usually not: accounts expect a stable address. Use a static ISP IP for that.

Further reading

Setup guides Proxy302 publishes on GitHub on the same topic:

Reference links

3
  1. RFC 9110 HTTP Semantics: the CONNECT method

    Official documentation · Confirmed on:

    Read on 20 November 2026: a 2xx response to CONNECT switches the connection into tunnel mode, a blind relay between two connections that does not alter the messages.

  2. RFC 1928 SOCKS Protocol Version 5

    Official documentation · Confirmed on:

    Read on 20 November 2026: the client connects to the SOCKS server, agrees an authentication method (username/password is one), then sends a request with a command (CONNECT, BIND or UDP ASSOCIATE), a destination address and a port.

  3. Proxy302 product facts and price list

    Product observation · Confirmed on:

    Product facts file of the site, checked 20 November 2026: rotating residential gateway, ports 2222 (HTTP) and 3333 (SOCKS5), prices per GB, countries, no cap on concurrent connections; connection and session behaviour from the line tests of the same month.

Ready to try it?

Create an account, top up once, then pick rotating residential, static ISP or datacenter IPs and have one running in your browser within minutes.

Rotating residential proxies

from US$1.50/GB
Get rotating residential traffic